Manual AEG PNEUMATIC 5000 E (page 5 of 55) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish)

463166

Zoom out

Zoom in

1/55

ENGLISH

PNEUMATIC 5000 E

In order to re-position the auxiliary

handle loosen it as shown in illustration

and move to the required position.

Refasten handle.

The auxiliary handle can also be attached to the side of the housing. This

position may be preferred when drilling into the floor or into the ceiling, for

example.

Remove the auxiliary handle from the front position and screw it down at the

side of the machine.

1 2

For drilling to specific depth, slide the

depth gauge into the hole provided in the

handle and fasten it at the required drilling

depth.

The ventilation slots of the machine must be kept clear at all times.

If the carbon brushes cut-out or the hammer capacity declines please contact your

authorized AEG service station. This will ensure long service life as well as constant

readiness for working of the machine.

The location of your nearest service station is shown in our “Service adresses” leaflet

attached to each product.

Use only AEG accessories and spare parts. Should components need to be

replaced which have not been described, please contact one of our AEG service

agents (see our list of guarantee/service addresses).

If needed, an exploded view of the tool can be ordered. Please state the ten–digit

No. as well as the machine type printed on the label and order the drawing at your

local service agents or directly at: Atlas Copco Electric Tools GmbH, Postfach 320,

D–71361 Winnenden.

Positioning the

auxiliary handle

Displacing the

auxiliary handle

Setting the

depth gauge

Maintenance

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG PNEUMATIC 5000 E in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 2,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG PNEUMATIC 5000 E Manual

Product: