Manual AEG NT 1500 A (page 6 of 62) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish)

463145

Zoom out

Zoom in

1/62

ENGLISH

NT 1200, NT 1500 A

After using the machine to collect up liquids, leave it standing open to dry. Take the

accessories apart and dry them as well. This is particularly important if the machine

is to be used for sweeping up dry matter later.

Due to the machin’s high cleaning/air power as well as the optimum flow container

form (tangential–cyclone–principle; no obstruction, filter is protected from damage) it

is possible that after having switched the machine off some water will flow back from

the hose or the container. This can be sucked off when restarting work.

1. Switch the machine off

2. Pull the plug out of the socket.

3. Open the snap-open grip and lift out the motor section.

4. Empty the container and if necessary clean it.

5. Fit the motor section and seal the snap–open grips.

1. Open the snap–open grips and remove the

motor section.

2. Fold the fastener to the side.

3. Take hold of the filter cartridge by the grip

and pull it straight out of the filter guides.

4. The filter cartridge can be cleaned with a

hand–brush – hold it over a container to

catch the dust. If it is very dirty or

damaged it should be replaced.

5. Insert new or cleaned filter cartridge and

push in to its full extent.

6. Fix the filter cartridge by folding back the

fastener.

7. Fit the motor section and seal the snap–open grips.

The suction strength decreases.

Possible causes:

–The collection container is full

–The filter cartridge is clogged with fine dust

–The suction hose, the suction tubes, or the nozzles are clogged

with bulky material.

When dust is being swept up the dust is thrown out through the ventilation opening.

Possible causes:

- Filter cartridge not fitted properly

- Filter cartridge damaged.

If the malfunction is not caused by any of the above possibilities, please contact

your local AEG after–sales services.

Use only AEG accessories and spare parts. Should components need to be

replaced which have not been described, please contact one of our AEG service

agents (see our list of guarantee/service addresses).

If needed, an exploded view of the tool can be ordered. Please state the ten–digit

No. as well as the machine type printed on the label and order the drawing at your

local service agents or directly at: Atlas Copco Electric Tools GmbH, Postfach 320,

D–71361 Winnenden.

Emptying the

machine

Exchanging the

filter cartridge

Malfunctions

Maintenance

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG NT 1500 A in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 2,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG NT 1500 A Manual

Product: