684409
8
Zoom out
Zoom in
Previous page
1/37
Next page
- 7 -
INBETRIEBNAHME DER NÄHMASCHINE / BEFORE SEWING
1.
Verbinden Sie den Stecker des Anlassers mit der Nähmaschine und
schließen Sie dann die Maschine an das Stromnetz an.
2. Die Nähgeschwindigkeit wird durch den Fußanlasser reguliert.
Benutzen Sie nur den Originalfußanlasser um Schäden zu vermeiden.
1. Connect foot controller with machine and plug in machine with
main socket.
2. Sewing speed can be varied by the foot control. Use only the original
foot controller with sewing machine in order to prevent damages.
ACHTUNG:
Wenn Sie die Maschine warten oder die Glühlampe tauschen, ziehen Sie stets den Netzstecker. Damit vermeiden
Sie Unfälle durch Stromschlag.
CAUTION:
When cleaning the machine or changing its lamp, disconnect it from the mains. You avoid accidents through
electric shock.
Austauschen der Glühlampe hinter dem Frontdeckel.
1. Um die Lampenklappe zu öffnen, müssen Sie die
Schraube
wie
angezeigt lösen.
2. Drehen Sie die Glühlampe gegen den Uhrzeigersinn heraus.
3. Schrauben Sie die Glühlampe im Uhrzeigersinn ein.
4. Verwenden Sie nur eine Glühlampe mit Schraubgewinde (E14) (max.
15W).
5. Nach dem Wechseln der Glühlampe und dem Schließen der
Lampenklappe schließen Sie die Verriegelung wieder wie angezeigt.
Bulb replacement:
1. Open face cover in direction of arrow.
2. Remove bulb by unscrewing it anti-clockwise.
3. Install a new bulb by screwing it in clockwise.
4. Use a screw type bulb with 15W. (max)
Fußanlasser
Speed Controller
Stromversorgung
Power supply
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG NM 2704 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG NM 2704 in the language / languages: English, German as an attachment in your email.

The manual is 3,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info