Manual AEG NM 1600 (page 8 of 20) (English)

470025

Zoom out

Zoom in

1/20

Remove and attach pr

esser foot

Remove:

Turn the hand wheel as wide as you can into

your direction until the needle reaches its hig-

hest position.

By lifting the presser foot lever you lift the

presser foot (1).

The presser foot falls down if you lift the lever

at the back of the foot switch (2).

Warning: Do not use force!

Attach:

Put the presser foot on the needle plate so

that the groove at the foot is directly situated

under the groove of the foot holder.

Adjust the threading tension

If you can pull the thread slightly with a small

resistance out of the bobbin, the threading

tension is correct.

As the lower threading tension is already set

by the factory concerning general sewing, it

needs not to be regulated very often.

In the case of very light or heavy materials,

the lower threading has to be regulated.

Adjust the lower threading

tension:

Turn the screw clockwise to increase the

tension.

Bedienungsanl.1800/1600 GB 30.08.2004 17:45 Uhr Seite 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG NM 1600 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG NM 1600 Manual

Product: