648427
32
Zoom out
Zoom in
Previous page
1/164
Next page
Operation - for users and contractors
32
4. Settings
The appliance heating system switches on automatically
as soon as you open the DHW valve at the tap or activate
the sensor of a sensor tap. The water is heated. The water
temperature can be adjusted at the tap:
For initial ow rate and ow rate limiting, see chapter
"Specication".

» Reduce the ow rate at the tap.

» Open the tap further or add more cold water.

See chapter "Commissioning / Recommissioning".
5. 

» Never use abrasive or corrosive cleaning agents. A
damp cloth is sufcient for cleaning the appliance.
» Check the taps/valves regularly. Limescale deposits
at the spouts can be removed using commercially
available descaling agents.
» Have the electrical safety of the appliance regularly
checked by an electrician.
» Regularly descale or replace the special aerator (see
chapter "Appliance description / Accessories").
6. Troubleshooting
Problem  
The appliance will not
start despite the DHW
valve being fully open.
No power to the ap-
pliance.
Check the fuses/
MCBs in your fuse
box.
The aerator in the tap
is scaled up or dirty.
Clean and/or descale
the aerator or replace
the special aerator.
The water supply has
been interrupted.
Vent the appliance
and the cold water
inlet line (see chapter
"Settings").
The required tem-
perature is not being
reached.
The maximum tem-
perature set inside the
appliance is too low.
Have your qualified
contractor adjust the
maximum tempera-
ture.
The appliance is at its
output limit.
Reduce the flow rate.
If you cannot remedy the fault, notify your qualied con-
tractor. To facilitate and speed up your enquiry, please
provide the serial number from the type plate (000000 /
0000-00000).
MTE . . .
Model:
000000
E-Nr:
F-Nr:
0000-00000
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG MTE 350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG MTE 350 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 32,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info