Manual AEG MRC 4147 (page 33 of 46) (English, German, Dutch, French, Italian, Polish, Spanish)

653959

Zoom out

Zoom in

1/46

English

7. Press the button to conﬁrm. Then select how you want

to be awakened. Select from:

• “bu” (buzzer):

A buzzer sounds when the alarm time is reached.

The buzzer interval increases from slow to fast. The

volume cannot be adjusted. The mood light (8) turns

on automatically.

• Radio frequency is displayed:

As soon as your set alarm time is shown, the radio

switches on. The last set station is played. The volume

increases slowly to the set volume. The volume

cannot be adjusted. The mood light (8) turns on

automatically.

NOTE:

• The alarm function turns off automatically after

30 minutes until the next day.

• If an audio cable is connected to the LINE IN jack,

the device will wake you with the buzzer, even if you

have selected “radio”.

7a. If you want to be awakened by a radio station, select the

maximum alarm volume using the

and buttons.

8. Press the

button to conﬁrm. Then select the light

intensity (

) for the alarm function. Selecting “ ” will

cancel this function.

NOTE:

The light inside the lamp shade (4) will turn on 30 minutes

prior to the pre-set alarm time. The brightness will

gradually increase, starting at the intensity level previ-

ously set.

9. Finally, press the

button again. The ﬁrst alarm time is

now activated.

To set the second alarm time, repeat the above steps with

the

button (24).

NOTE:

• If the alarm time has been activated, AL1 (1) or AL2 (7)

will appear in the display.

• In order to briey display the set alarm times, press the

, respectively the button.

Turning off the Alarm

Press the

button (23) to stop the alarm.

Automatic Alarm Interval

The automatically set alarm function can be shut off for ap-

proximately 9 minutes with the SNOOZE/SLEEP / DIMMER

button (22).

NOTE:

AL1 or AL2 will ﬂash in the display if the snooze function has

been activated.

Deactivate the Alarm Function

1. Switch the device to standby with the

button (23).

2. To deactivate the alarm function, keep the

button (13)

button (24) pressed. AL1 (1) or AL2 (7) will disappear.

Delayed Shut-Off

You can use the function for delayed power-off with radio

operation. The unit is switched off automatically when the

selected time is reached.

• Select the time after which the unit is switched off by

repeatedly pressing the SNOOZE/SLEEP / DIMMER

button (22). The following selections can be made: 90, 60,

30, and 15 minutes. The OFF setting (off) deactivates this

function.

• This function can be cancelled with the

button (23).

Nap alarm

The nap alarm can be used for e.g. a short “nap”. The func-

tion only operates in standby.

• Press the

button repeatedly (17) to select the time

after which the device will beep. Select from 90 to 10 min-

utes or OFF (off) in steps of 10 minutes.

• After the selected time has elapsed, an increasingly fast

beep will sound. Use the button (23) to turn off the

beep.

AUX IN jack

(Cable not included)

1. If required, use a suitable adapter (not included).

Connect the external device as follows:

• With a 3.5 mm stereo jack plug to the LINE IN socket

(10).

2. Turn the device on using the

button (23). LINE IN ap-

pears in the display.

3. Start the playback of your audio source. Listen to the

sound playback via the speaker. You can adjust the

volume using the / buttons (24/13).

4. For the further procedure, please refer to the user manual

of the external audio source.

NOTE:

If possible, adjust the volume of the external unit to a com-

fortable level.

Stop AUX IN operation

Disconnect the cable from the AUX IN jack. The device will

return to radio mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG MRC 4147 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG MRC 4147 Manual

Product: