653960

AEG MRC 4145 F Manual

31
Zoom out
Zoom in
Previous page
1/54
Next page
English
31
14 Sleep timer active
Rear (not shown)
Dipole antenna
Power adapter socket - DC 5 V
Bottom (not shown)
Battery compartment
Start-up of the device/ Introduction
• Chooseasuitablelocationforthedevice.Suitablewould
be a dry, level, non-slip surface.
• Sensitivesurfacessuchasthedisplayarepossiblypro-
tected with foil. Remove these foils.
Display lighting
• Mains operation: The display is lit continuously. Press the
SNOOZE/LIGHT button in order to increase the intensity
of the display lighting for 8 seconds.
• Battery operation: The display backlight turns off auto-
matically. Press the SNOOZE/LIGHT button. The display
is lit for 8 seconds.
Power supply
1. Make sure the grid voltage corresponds to the figures on
the rating plate.
2. Plug the power supply unit into a properly installed
protective contact socket.
3. Connect the device with the power supply unit by
plugging the jack of the power supply unit into the
“DC 5 V
” jack.
CAUTION:
• Thisdeviceshouldonlybeusedwiththemainssupply
unit (included). Do not use it for other devices.
• Onlyusea5Vpowersupplyunit(
). A different
supply unit may damage the device.
NOTE:
• Disconnectfrommainspowersupplyduringlonger
periods of non-use.
• Ifyoudidnotinsertanotherreservebattery,thetime
and the station memory will be lost as soon as the
power supply is interrupted.
Inserting the reserve batteries
(Batteries are not included in the scope of delivery)
In case of power failure or if the power supply unit is pulled
from the plug, the settings are maintained if the reserve bat-
teries are inserted.
1. Open the battery compartment on the bottom side.
2. Insert three type AA/R6 1.5 V batteries. Check that the
polarity is correct (see battery compartment).
3. Close the battery compartment.
WARNING:
Donotexposethebatteriestointenseheat,suchassun-
light, fire or similar. Danger of explosion!
CAUTION:
• Batteriesmayleakandlosebatteryacid.Ifthedeviceis
not used for a longer period of time, remove the bat-
teries.
• Differentbatteriesornewandusedbatteriesmaynot
be used together.
• Batteriesmustnotbedisposedofinthegarbage.
Please bring used batteries to competent collection
centers or back to the dealer.
NOTE:
Battery operation is also possible with the inserted batteries.
Switching the device on/ off
• PresstheRADIOON/OFFbuttontoturnthedeviceon
or off.
• Inordertofullydisconnectthedevicefromthemains,
unplug the power adapter from the wall socket.
Temperature display
The current ambient temperature is shown on the bottom
right of the display.
The temperature display can be switched between °C (De-
gree Celsius) and °F (Degree Fahrenheit).
1. Turn off the device.
2. Press the UP button repeatedly.
Setting the Clock
Automatic (in Standby only)
• Afterpluggingthemainsplugintothesocket,thetime
data from the DCF77 station is automatically transferred
after a few minutes. As long as the “
”symbolisash-
ing, the device is searching for the radio signal. If a radio
signal has been found, the “
” symbol lights up. The
correct time appears on the display.
• Thetimeisautomaticallysynchronizedapprox.every
2 hours via transmitter signal.
• Duringsummertime“
” appears in the display.
NOTE:
The signal can be received without problems within a
radiusofapprox.2000kmaroundFrankfurt/Main,but
interference may occur, depending on local conditions.
This may occur especially in buildings containing a high
percentageofmetal,aswellasinproximitytoTVsets,PCs,
mobile phones etc. which are switched on! If the reception
cannot be automatically adjusted after 10 minutes in spite
of the alignment of the integrated antenna, the reception
in the respective location is too weak. In this case, set the
time manually or change location.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG MRC 4145 F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG MRC 4145 F in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 7,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info