551771
37
Zoom out
Zoom in
Previous page
1/66
Next page
English
37
Playing back music files
You have two possibilities to replay your own music files with
the device: Wired or wireless via Bluetooth.
By cable (Cable not included)
1. If required, use a suitable adapter (not included).
Connecttheexternaldeviceasfollows:
• Witha3.5mmstereojackplugtotheAUXINsocket
(Back side of the device).
2. Repeatedly press the POWER/FUNCTION button (1)
until “AU” is shown in the display.
3. Start the playback of your audio source. Listen to the
sound playback via the speaker. You can adjust the vol-
ume using the VOLUME+/AL1 / VOLUME-/AL2 buttons
(7/6).
4. For the further procedure, please refer to the user manual
oftheexternalaudiosource.
NOTE:
Ifpossible,adjustthevolumeoftheexternalunittoacom-
fortable level.
Cordless via Bluetooth
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
canbecausedforexamplebyWLAN-networks,DABradios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enableddevice.Thefunctionalradiusislimitedtoapprox.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile (Audio Video Remote
Control Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
• Loggingondevices(Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in
your player (e.g. mobile phone). For this, refer to the
operation manual of your player.
2. Press the POWER/FUNCTION button (1) repeatedly,
until “bt” is shown on the display. Two short beeps
can be heard. These signalize that the device is in
pairing mode.
3. Chose the Bluetooth menu in your player and register
the device in your player. For this, refer to the opera-
tion manual of your player. The device “AEG MRC
4132 BT” will show in your player as a selection.
NOTE:
Only one playback device may be connected with
the device at one time. If the device is already con-
nected with another playback device, the device
will not show up in the BT selection menu.
4. Now enter the password “0000” in your player,
depending on the device manufacturers, model, and
software version.
If the registration was done successfully, a beep will sound.
For the further procedure, please refer to the user manual
of the playback unit. If possible, adjust the volume of the
externalunittoacomfortablelevel.
NOTE:
• Dependingonthedevicemanufacturer,youneedto
perform the registration (PAIRING) again to connect the
devices.
• Incaseofproblemswiththeregistrationofaplayback
device, deactivate the Wi-Fi/mobile data function on
your playback device.
• TheBluetoothcompatibilitycannotbeensuredfor
devices (e.g. mobile phones) getting released in the
future.
• Toensureanoptimalconnection,makesurethatthe
battery of your player is completely charged.
• Someofthemobilephonebrandshaveanenergy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• Tobeabletotransferaudiodata,Bluetoothneedsto
stay activated in your player Observe the operation
manual of your player.
• Ifamobilephoneonwhichyouareplayingmusic
receives a call, the music will be interrupted. Press the
/ button (11), to accept the call. The sound is
replayed by the loudspeakers. Speak into the micro-
phone on the device or transfer the conversation to
your mobile phone. To do this, observe the overlay in
the display of the mobile phone. After you have ended
the call, the devices are connected to each other again
and playback continues.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG MRC 4132 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG MRC 4132 BT in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 8,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info