551764

AEG MRC 4100 Manual

18
Zoom out
Zoom in
Previous page
1/28
Next page
ENGLISH
18
General safety instructions
To avoid the risk of fi re or an electric shock, you should
not expose the device to rain or moisture. Consequently,
do not use the device in the immediate vicinity of water
- for example near a bath tub, a swimming pool or in a
damp cellar.
Use the device only for the intended purpose.
Only connect the device at a properly installed plug
socket. Pay attention that the specifi ed voltage corres-
ponds to the voltage of the plug socket.
When using external mains supply, pay attention to the
correct polarity and voltage. Always place the batteries
in the correct direction.
Assemble the device in such a way that the available
ventilation openings are not covered.
Never open the housing of the device. Incorrect repairs
can constitute a considerable risk for the user. Should
the device become damaged, in particular the mains
supply cable, do not operate the device any longer, but
rather have it repaired by an expert. Check the mains
supply cable regularly for damage.
For safety reasons a broken or damaged mains lead may
only be replaced by an equivalent lead from the manuf-
acturer, our customer service department or a similary
qualifi ed person.
If the device is not used for a longer period, remove the
plug connector from the plug socket or take out the
batteries.
These symbols may be found on the machine and are
intended to indicate the following:
The lightning symbol should advise the user
of parts in the inside of the device which carry
dangerously high voltage levels.
The symbol with an exclamation mark should
advise the user of important operation or
maintenance instructions in the accompa-
nying documentation.
Devices bearing this symbol work with a
„class 1 laser“ for tracing the CD. The built-in
safety switches should prevent the user being
exposed to dangerous laser light, which is
invisible to the human eye, when the CD compartment
is opened.
Under no circumstances should these safety switches
be bypassed or manipulated, as this could result in a
danger of exposure to the laser light.
Overview of the Components
1 Set minutes (MINUTE)
2 Hour function key (HOUR)
3 Time setting function key (TIME)
4 Alarm function key (ALARM)
5 Function key for delayed switch-off (SLEEP)
6 Wake-up interval (SNOOZE)
7 Function switch (AUTO/OFF/ON)
8 LED for activated alarm function (AUTO)
9 Station scale
10 TUNING regulator
11 LED
12 BUZZ / OFF / VOL (volume) regulator
13 Throw-out antenna
14 Battery compartment
Putting into function
Insert the plug into a properly installed 230 V, 50 Hz
power socket.
Radio station tuning
Push the function switch (7) to the ON position and
select a station by turning the TUNING control (10). The
tuning scale (9) indicates the selected frequency.
If reception is too weak and the station being received
hisses, try to improve reception by turning, unwinding or
winding up the throw-out antenna (13).
Volume
Adjust the volume using the VOL(UME) regulator (12).
Setting of the Clock (24 h)
Hours: Press the TIME key (3) and the HOUR key (2)
simultaneously.
Minutes: Press the TIME key (3) and the MINUTE key
(1) simultaneously.
Setting of the Alarm (24 h)
Hours: Press the ALARM key (4) and the HOUR key
(2) simultaneously.
Minutes: Press the ALARM key (4) and the MINUTE key
(1) simultaneously.
Radio alarm
• Once the alarm times are set and a radio station
has been selected, shift the function selector (7) to
„AUTO“. A dot in the display (11) appears next to
AUTO (8).
• As soon as the alarm time is reached, the radio is
switched on. The selected radio station plays at the
set volume.
Buzzer alarm
• If you would not like to be woken up by the radio,
turn the volume control (12) to the BUZZ position
(buzzer) until it locks in place.
• Instead of the radio, the buzzer goes off when the
alarm time is reached.
To turn off the alarm, push the function switch (7) to the
OFF position or press the ALARM button (4).
5....-05-MRC 4100 18 15.01.2004, 12:02:23 Uhr
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG MRC 4100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG MRC 4100 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info