Manual AEG MC 4469 DAB plus (page 26 of 32) (English, German)

654097

Zoom out

Zoom in

1/32

NOTE:

The slightly larger rectangle indicates the audio quality

threshold. If the signal strength, as indicated by the solid

rectangles, falls below this threshold the audio quality will

deteriorate. At the same time the appliance scans for any

DAB stations on the selected frequency and updates the

station list with any new stations found. To listen to any

stations found, return to the Now playing screen and

select the required station from the station list as normal.

5. Now Playing Information

While a station is playing, the screen shows its name and

DLS (Dynamic Label Segment) information broadcast by

the station such as program name, track title and contact

details.

Long DLS info, over 16 characters scrolls a cross the display.

Viewing Further Information

Press the INFO button.

Each time you press the INFO button the next set of infor

mation is displayed, cycling through: DLS text, DL Plus in-

formation (this is only displayed if broadcast by the station),

signal strength, program type, ensemble name, channel

number / frequency, signal error rate, bit rate, codec / DAB

variant, time and date.

NOTE:

DL Plus presents additional information that can be broad-

cast by stations and stored temporarily on your radio.

To return to the default Now playing screen at any time,

press and hold the INFO button.

6. Other Settings

Dynamic range compression (DRC)

This function reduces the difference between the loudest

and quietest audio signal being broadcast.

Effectively, this makes quiet sounds comparatively louder

and loud sounds comparatively quieter.

NOTE:

DRC only works if it is enabled by the broadcaster for a

speciﬁc station.

Changing the DRC Setting

Select MENU > DRC > off | low | high.

FM Operation

FM radio mode receives analogue radio from the FM band

and displays RDS (Radio Data System) information about

the station and show (where broadcast).

1. Selecting Stations

The ﬁrst time you select FM radio, the appliance is set to

the lowest frequency in the FM band.

Scanning for a station in FM mode

Press the AMS button. The appliance scans up through the

frequencies of the FM band, showing the current frequency

and the text “Scanning…” on the screen display.

A scan stops when a signal is found. The appliance can be

set to stop at each station or only at stations with a strong

signal (for details see Scan settings on the next page).

Alternatively, you can use the

/ buttons to tune, in

50 kHz steps.

2. Presets

The appliance has 40 preset memory locations for FM,

which work in the same way as DAB mode presets, as

described earlier in Presets on previous page.

3. Now Playing Information

While FM radio is playing, the screen shows its frequency, or

if RDS information is available, station name and any further

“Radio Text” information.

If no information is available just the frequency and a No

Radio Text message is shown.

Viewing further information about the broadcast

Press the INFO button.

Each time you press the INFO button the next set of infor

mation is displayed, cycling through:

RDS Radio Text, program type, frequency, mono / stereo,

time and date.

Returning to the default Now playing screen

Press and hold the INFO button.

4. Other Settings

Scan Setting

By default, FM scans stop at any available station (ALL

Stations). This may result in poor quality audio from weak

stations.

Options: All stations | Strong stations only

Changing the scan setting to stop only at stations with

good signal strength

Select MENU > Scan setting, then Strong stations only.

NOTE:

The asterisk indicates “Strong stations only” is the

currently set value.

Audio Setting

Select MENU > Audio setting. By default, all stereo

stations are reproduced in stereo. For weak stations, this

may result in poor quality audio. The audio quality can be

improved using mono.

Options: Stereo allowed | Forced mono

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG MC 4469 DAB plus in the language / languages: English, German as an attachment in your email.

The manual is 13,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG MC 4469 DAB plus Manual

Product: