482986
46
Zoom out
Zoom in
Previous page
1/54
Next page
46
ENGLISH
14 VOLUME +/- buttons
15 FUNCTION (function switch)
16
iPOD OPEN/CLOSE Docking port compartment
17
STANDBY/ON button (standby/power)
18 ID3/MONO/ST. button
19 LINE IN connection
headphone jack
20
Open/close docking port
21 Docking port compartment
Rear view (not shown)
FM ANT. aerial antenna
Underside
22 mains switch
Mains cable
Remote control
1 FUNCTION (function Selection button)
2
CD OPEN/CLOSE button
3
iPOD OPEN/CLOSE button
4 iPOD/MEM/C-ADJ. button (memory/clock)
5
/ PRESET/ FOLDER buttons (up/down, album/ radio
memory position)
6 RANDOM button (Random play)
7 TIMER button
8 SLEEP button
9 VOLUME +/- buttons
10 INTRO button
11
MUTE button
12 EQ button
13 REPEAT button
14
/ ENTER (play/pause/ Enter) button
Button (search forward)
(search backwards)
/ MENU (Stop/Menu) button
15 ID3/ST/MO button
16 STANDBY/ON button
Installation/Introduction
Read the manual thoroughly before operating the
device!
Choose a suitable location for the device. Suitable
locations are dry, even and anti-slip surfaces on which
you may operate the device easily.
Make sure there is proper ventilation for the device!
Remove, if necessary, the protection sheet from the
display.
Wall mounting
You can also mount the device to the wall (mounting ac-
cessories not supplied).
CAUTION:
Make sure beforehand whether there are cables in the
wall which could be damaged!
NOTE: Check the reach of the cable!
To mount the device, make sure that an easily accessible
plug outlet is available within reach of the power cable.
The distance between the mountings for wall mounting is
240 mm.
Drill two holes horizontally 240 mm apart.
Fit rawlplugs and screws into the holes.
Tighten the mounting screws until they protrude
around 4 mm from the wall.
Mount the device onto the screws. Check that it is
secure.
Power supply
Connect the mains plug to a standard outlet, 230 V,
50 Hz.
Make sure the voltage is in conformity with the rating
plate.
The time settings will be lost as soon as the power sup-
ply has been interrupted.
Use the mains switch (22) on the underside of the
device to switch the device on.
Setting the clock (during standby mode)
1. Press the iPOD/MEM/C-ADJ. button (11/4). The display
will show “24 HOUR”.
2. Use the
/ SKIP/TUNE SEARCH buttons (7/14) to
select between 24-hour and 12-hour display setting.
Conrm with iPOD/MEM/C-ADJ.
NOTE: The 12-hour setting will result in the fol-
lowing display
AM = morning, PM = afternoon.
3. Use
/ SKIP/TUNE SEARCH buttons to set the hours.
Conrm with iPOD/MEM/C-ADJ.
4. Use / SKIP/TUNE SEARCH buttons to set the
minutes.
5. Press iPOD/MEM/C-ADJ. again in order to save the
time settings.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG MC 4450 iP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG MC 4450 iP in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info