English
49
Selecting a section to be repeated
Using the DVD-menu
Using fast forward or reverse
Enlarging a screen section
Changing the viewing angle
You can dene a freely selected section to be automatically repeated.
To do this, proceed as follows:
1. Mark the beginning of the section to be repeated. During repetition
press the button A-B (Fig. 2/9) on the remote control once. The
message “REPEAT A-“ appears on the screen.
2. Mark the end of the section to be repeated by pressing the A-B
button on the remote control once again. The message “REPEAT
A-B “ appears on the screen. The previously marked section is now
repeated.
Press the A-B-button again to stop the repetition.
NOTE:
The section of an audio/MP3 CD to be repeated has to be part of one
track.
Normally each DVD has its own menu. Here you can choose chapters,
make settings, etc. This menu is specic for the DVD and can thus not be
explained in detail.
Press the MENU-button (Fig. 2/6) to access the DVD-menu. Use the Cur-
sor Buttons (Fig. 2/24) to navigate in the Menu. Press the ENTER-button
(Fig. 2/16) to conrm.
If you are in a menu area for direct chapter selection, you can enter the
number of this chapter with the Numerical Buttons (Fig. 2/31) on the
remote control.
The DVD-Player has a fast forward and a fast reverse feature.
1. Press the (Fig. 2/18) or button (Fig. 2/18) to start fast forward
or fast reverse. The current replay direction and the speed, e.g. “FOR-
WARD X2“ is now displayed on screen.
2. Press the or. button several times in order to change the speed.
The speed can be accelerated by factor 2, 4, 8 or 20.
3. Press the “PLAY “-button (Fig. 2/26) to restart the “normal” replay
when the desired section is reached.
You can change the screen section when viewing DVDs, VCDs or images.
Press the ZOOM-button (Fig. 2/28) to change the screen section.
Press the button several times to select the suitable zoom factor or to
return to the original zoom factor.
NOTE:
Use the Cursor Buttons (Fig. 2/24) to navigate in the picture you have
zoomed into.
Some DVDs oer the possibility to select the viewing angle.
Press the ANGLE-button (Fig. 2/34) to change the viewing angle.
NOTE:
If changing the Viewing Angle is not possible, the message “INVALID
KEY“ will be displayed.
Repeat pressing the button to choose a dierent viewing angle, or to
return to the original viewing angle.
