Manual AEG mc 4421 (page 9 of 71) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Finnish)

160782

Zoom out

Zoom in

1/71

17. 16.

REMOTE CONTROL

1. STOP button

2. REW button

3. PROG button

4. FOLDER UP button

5. CD / CARD / USB button

6. PLAY / PAUSE button

7. F.FWD button

8. Battery compartment

CHANGE BATTERIES

1. Open the battery cover at the rear of the remote control.

2. Insert 2 x AAA batteries while observing the polarity. We recommend the use of alkaline

batteries.

3. Close the battery compartment properly.

POWER SUPPLY (MAINS 230V ~ 50HZ)

Connect the power supply cable plug to a (230V ~ 50Hy) wall outlet.

Warning:

• Before using the device, check that the local mains power supply is compatible with the HI-FI

System (230V ~ 50Hz).

• Do not plug or unplug the power supply cable with wet hands.

• When planning not to use this unit for long periods of time (i.e. vacation, etc.) disconnect from

the wall outlet.

• When disconnecting from the wall outlet, please pull the plug; do not pull the cord in order to

avoid electric shock caused by the damaged cable.

BATTERY SAFETY PRECAUTIONS:

• Keep batteries away from children and pets.

• Insert the batteries observing the polarity (+/-). Failure to properly align the battery polarity can

cause damage and/or property damage.

• Remove exhausted batteries from the device. Remove the batteries when the device will not be

used for extended periods of time to prevent damage due to battery leakage.

• Never throw batteries into the fire. Do not expose batteries to fire or other heat sources.

• Battery disposal: exhausted batteries must be properly disposed of and recycled in compliance

with all applicable laws. For detailed information contact your local municipality’s waste authority.

• Follow the battery manufacturer’s safety, usage and disposal instructions.

BACKUP BATTERY

Two 1.5V “AA” batteries (not included) may be installed as a backup option to maintain the time in

case of power failure. In the event of a power outage, the clock will continue to operate and the

actual time will be maintained. The LCD display and other functions will resume once electrical power

is restored. The backup batteries should be replaced as needed; remove the batteries if the clock is not

used or stored for long periods of time.

SET CURRENT TIME

Connect the AC power cord to a wall outlet.

1. While pressing and holding the TIME SET button, press the HOUR button to set the desired

hour.

2. While pressing and holding the TIME SET button, press the MIN button to set the desired

minutes.

SET ALARM

1. While pressing and holding the AL.SET button, press the HOUR button to set the desired alarm

hour.

2. While pressing and holding the AL.SET button, press the MIN button to set the desired alarm

minutes.

3. After setting the alarm time, remember to press the AL.ON / OFF button to turn on the alarm

function (alarm icon will be displayed in the LCD).

NOTE:

1. When sliding the function switch to BUZZ position the unit will turn to standby mode.

2. When sliding the function switch to BUZZ position, the unit cannot be turned on with the

STANDBY / ON button until sliding the switch to CD / RADIO / AUX mode.

WAKE UP TO ALARM BUZZER:

a. Slide the BUZZ / CD / RADIO / AUX function selector to BUZZ position.

b. The alarm buzzer will sound for 3 minutes at the set alarm time.

Note: Press the AL.ON / OFF button to turn off the alarm.

WAKE UP TO CD:

a. Slide the BUZZ / CD / RADIO / AUX function selector to CD position.

b. Open the CD door manually and insert a CD (with the label side facing up) into the CD

compartment.

c. Close the CD Door manually.

d. The CD will sound at the set alarm time playing the first track on the CD.

Note: The unit will automatically be turned off after 1 hour.

To deactivate the alarm (CD) manually, press the STOP Button.

WAKE UP TO RADIO:

a. Slide the BUZZ / CD / RADIO / AUX function selector to RADIO position.

b. Slide the AM / FM MO / FM ST Band selector to AM or FM position.

c. Press the STANDBY / ON button to turn the unit on.

G 7XQHWKHUDGLRZLWKWKHŻ781,1*ŹFRQWURONQREWRDEURDGFDVWLQJVWDWLRQDQGDGMXVWWKH

volume.

e. Then press the STANDBY / ON button to turn off the unit.

f. The radio will sound at the set alarm time.

Note: The unit will automatically be turned off after 1 hour.

To deactivate the alarm (Radio) manually, press the STANDBY /ON button.

TURN OFF ALARM

To cancel the alarm mode:

Press the AL.ON / OFF button to turn off the alarm function (the alarm icon in the LCD display

turns off).

ADJUST VOLUME

• Press VOL + button to increase the volume.

• Press VOL - button to decrease the volume.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG mc 4421 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Finnish as an attachment in your email.

The manual is 12,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG mc 4421 Manual

Product: