160419
51
Zoom out
Zoom in
Previous page
1/82
Next page
ENGLISH
ENGLISH
ENGLISH
51
BASS (19 on the remote control)
To increase or decrease the bass output.
BASS ON = on, BASS OFF = off.
Infrared remote control
For operating the music centre from a distance of up to 5 metres
without a lead. If the range of the remote control is reduced, the
batteries have to be replaced. During operation ensure that there
is nothing blocking the direct line between the remote control
and the sensor (3) on the machine.
USB Connexion (7)
This device has been developed in accordance with the latest
technical developments in the USB fi eld. Unfortunately the large
number of different types of USB storage media on offer today
makes it impossible to guarantee full compatibility with all USB
storage media. For this reason there may be problems in rare
cases with playing back from USB storage media. This is not a
malfunction of the device.
1. In order to switch on the device please press the
POWER /„
“ switch (4/12).
2. Now press the FUNCTION button (6/8) to select the CARD-
USB mode.
3. Connect a USB storage medium. After a few seconds
„USB“, „STOP“, „MP3“ appears in the display and the total
number of tracks.
4. Press PLAY/PAUSE (14/1) to play back the music data.
For operating instructions please see the section “Playing
CDs/MP3s”.
ޥ NOTE:
If an SD/MMC card is inserted it is preferentially selected,
depending on the USB storage medium. CARD appears
in the display. In this case remove the memory card.
If you have problems with operation using the USB
connexion, please use an appropriate adapter cable and
proceed as described under AUX.
CAUTION:
Before removing the USB storage medium, switch the device
to TUNER operation using the FUNCTION button (6/8).
SD/MMC-CARD Slot (9)
1. If you would like to play back data on an SD/MMC card
please insert it into the opening provided.
2. Now press the FUNCTION button (6/8) to select the CARD-
USB mode. After a few seconds „CARD“, „STOP“, „MP3“
appears in the display and the total number of tracks.
3. Press PLAY/PAUSE (14/1) to play back the music data.
For operating instructions please see the section “Playing
CDs/MP3s”.
ޥ NOTE:
If a USB storage medium is also inserted in the USB connec-
tion, or if CARD mode is not automatically selected, press the
STOP button (16/2).
AUX socket (24)
To connect analogue replay devices. Using this socket it is
possible to hear the sound of other playback devices such as
MP3 players, CD players etc. through the loudspeaker.
1. Please connect the external device with a 3.5 mm stereo
jack plug to the AUX socket (24).
2. Press the FUNCTION button (6/8) repeatedly until „AUX“
appears in the display.
3. Through the loudspeakers you will now hear the sound from
the external device. You can adjust the volume with the
VOLUME control (5).
4. For the remaining procedure please see the operating
instructions of the external sound source.
ޥ NOTE:
Adjust the volume of the external device to a comfortable level.
Listening to the Radio
1. Press the FUNCTION button (6/8) to select radio mode.
Press the BAND button (2/7) to select between FM and AM.
VHF = FM, Medium wave = MW (mono)
2. Tune in to the desired station with the help of the
SKIP+
̈̈
/SKIP-
̇̇
buttons (8/4).
3. The FM.ST control lamp ((ST)) (in the display) only lights up
if the selected station is being received in stereo quality. If
reception is too weak and there is noise on the station being
received, this lamp will fl icker. Try to improve reception by
turning and bending or twisting and altering the length of the
antenna (22). In the case of FM stations you can use the
INTRO/ST button (18) (FM/ST (11) on the remote control) to
switch between mono and stereo reception. If reception is
poor we recommend switching to mono.
4. For the reception of AM stations connect an AM antenna to
the AM ANT connections (23). If reception is too weak and
the station being received hisses, try to improve reception
by turning the AM antenna. In this frequency band programs
are transmitted in „mono“ only.
5. If you have found the desired station, press the PROG
button (10/6). The word MEMORY lights up and the station
memory number fl ashes.
6. In order to select the program location, press the RAN/M- /
REPEAT/M+ /
̈̈
I/I
̇̇
buttons (17/15/3).
7. To store this position, press the PROG button (10/6). Please
note that the programme storage location must be entered
within fi ve seconds as the procedure is then cancelled.
To select a stored station press the RAN/M- / REPEAT/M+ /
̈̈
I/I
̇̇
buttons (17/15/3).
ޥ NOTE:
Station presets 0-9 can also be selected with the number
buttons (17) on the remote control.
05-MC 4412 AEG 51 18.06.2007, 11:56:58 Uhr
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG mc 4412 cd mp3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG mc 4412 cd mp3 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info