820957
23
Zoom out
Zoom in
Previous page
1/40
Next page
Cancelling the delay start after the
countdown has started
To cancel the delay start:
1. Touch the Start/Pauze - Départ/Pause
button to pause the appliance. The
related indicator flashes.
2. Touch the Startuitstel - Départ Différé
button repeatedly until the display shows
.
3. Touch the Start/Pauze - Départ/Pause
button again to start the programme
immediately.
Changing the delay start after the
countdown has started
To change the delay start:
1. Touch the Start/Pauze - Départ/Pause
button to pause the appliance. The
related indicator flashes.
2. Touch the Startuitstel - Départ Différé
button repeatedly until the display shows
the desired delay time.
3. Touch the Start/Pauze - Départ/Pause
button again to start the new countdown.
12.7 Starting a programme
Touch the Start/Pauze - Départ/Pause button
to start the programme.
The related indicator stops flashing and stays
on.
The programme starts, the door is locked.
The display shows the indicator .
The drain pump can operate shortly
before the appliance fills water.
12.8 The ProSense load detection
The programme duration in the display is
referred to a medium/high load.
1. The appliance detects the load in the first
30 seconds: the indicator and the time
dots flash, the drum rotates shortly.
2. At the end of the load detection, the
indicator goes off and the time dots
stop flashing. The programme duration
will be adjusted accordingly and could
increase or decrease. After further 30
seconds, the water filling starts.
In this case, for 30 seconds, it is possible to
pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Start/Pauze - Départ/Pause button
to start the programme again. The ProSense
phase can be repeated up to three times (see
point 1).
Important! If the laundry amount will not be
reduced, the washing programme starts
anyway, despite the overload. In this case, it
will be not possible to guarantee the best
washing results.
About 20 minutes after the programme
start, the programme duration could be
adjusted again depending on the
capacity of water absorption of the
fabrics.
The ProSense detection is carried out
with complete washing programmes only
(no skipping phase selected).
The ProSense is not available with some
programmes, such as Wol/Zijde - Laine/
Soie, programmes with short cycles and
without washing phase.
12.9 Interrupting a programme and
changing the options
When the programme is running, you can
change only some options:
1. Touch the button Start/Pauze - Départ/
Pause.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
ENGLISH 23
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG LF62R840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG LF62R840 in the language / languages: English as an attachment in your email.

The manual is 1.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG LF62R840

AEG LF62R840 User Manual - German - 44 pages

AEG LF62R840 User Manual - Dutch - 40 pages

AEG LF62R840 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info