661982
93
Zoom out
Zoom in
Previous page
1/104
Next page
The padlock symbol appears in the display to indicate that the child safety device is
activated.
The child safety device is not deactivated once the programme comes to an end.
If you want to set a new programme, you must first deactivate the child safety device.
Starting the programme
Press the START PAUSE (START PAUZE) button (6). The programme is started.
The programme progress is shown in LCD by appropriate set of icons. From left to the
right, from iron dry
to anti-crease icon depends on the drying cycle chosen. E. g.
in case of cupboard dry programme the following status icons are visible:
. Current cycle progress is marked by flashing dash under status icon. When appropri-
ate part of drying cycle is accomplished dash becomes steady and appears flashing under
next status icon.
Changing programme
To change a programme which has been selected by mistake once the programme has
started, first turn the programme selector to OFF and then reset the programme.
The programme can no longer be changed directly once the programme has started. If
nevertheless there is an attempt to change the programme on the programme knob, the
programme progress display and the maintenance indicators flash. If an option (exclud-
ing the buzzer ) is set, Err appears in the multidisplay. The drying programme is not how-
ever affected by this (laundry protection).
Programme complete / Laundry unloading
Once the drying cycle is complete, display shows a blinking , under anti-crease icon
appears dash. If the buzzer option has been set, an acoustic signal sounds intermittently
for about one minute.
The drying cycles (except for the WOOL programme) are automatically followed by an anti-
crease phase which lasts around 30 minutes. The drum rotates at intervals during this
phase. This keeps the laundry loose and free of creases. The laundry can be removed at
any time during the anti-crease phase. (The laundry should be taken out towards the end
of the anti-crease phase at the latest to prevent creases from forming.) If long anti-
crease
option has been set, the anti-crease phase is lengthened by 60 minutes.
1. Open door.
2. Before removing the laundry, remove fluff from the micro-fine filter. It is best to use
a damp hand for this purpose. (See “Care and cleaning” chapter.)
3. Remove laundry.
4. Turn the programme selector to OFF (UIT) .
After each drying cycle:
- Clean the micro-fine filter and fine filter
- Drain the condensed water container
(See chapter “Care and cleaning”.)
5. Close the door.
Daily use
93
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG LAVATHERM 59850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG LAVATHERM 59850 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG LAVATHERM 59850

AEG LAVATHERM 59850 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info