49140
44
Zoom out
Zoom in
Previous page
1/56
Next page
Installation and Connection Instructions
44
Prepare the installation place
The installation surface must be clean and dry, free of floor wax and
other smearing substances, so that the appliance does not slip off. Do
not use any lubricant as sliding aid.
Installation on a high-veil carpet or floor tiles with soft sponge backs
is not recommended because the standing safety of the appliance is
then no longer ensured.
By installation surfaces with small-format tiles, lay a conventional
rubber mat underneath.
Small unevenness of the floor surface should never be levelled out by
laying pieces of wood, carton or similar elements, but rather basically
compensated by adjusting the screw feet.
When it is unavoidable to install the appliance besides a gas or a
coal-fuelled cooker, due to spatial reasons: insert a piece of heat-
insulating board (85 x 57 cm) between the cooker and the washing
machine; the board side facing the cooker must be provided with an
aluminium foil.
The washing machine may not be installed in a frost-endangered
room. Frost-caused damages!
Flexible feed and drain tubings may not be crinkled or squeezed.
Installation on a concrete base
For installation on a concrete base
sheet metal mounts must be used
with which the washing machine is
levelled. Sheet metal mounts are
available from customer service
under replacement part number
645 425 058.
44


Need help? Post your question in this forum.

Forumrules
1

Forum

aeg-lavamat-86820

Reset search

  • Soap is not dispensing from some of the reservoirs - including the main ‘Washing powder / liquid’ reservoir. Is this a problem with water not falling from the correct ‘holes’ above the soap. If so, is this indicative of these water holes being blocked? How might I go about unblocking? Submitted on 8-1-2020 at 22:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Lavamat 86820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Lavamat 86820 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG Lavamat 86820

AEG Lavamat 86820 User Manual - German - 48 pages

AEG Lavamat 86820 User Manual - German - 52 pages

AEG Lavamat 86820 Manual - Dutch - 14 pages

AEG Lavamat 86820 User Manual - Dutch - 48 pages

AEG Lavamat 86820 User Manual - Dutch - 28 pages

AEG Lavamat 86820 User Manual - Danish - 52 pages

AEG Lavamat 86820 User Manual - French - 56 pages

AEG Lavamat 86820 User Manual - Italian - 64 pages

AEG Lavamat 86820 User Manual - Swedish - 52 pages

AEG Lavamat 86820 User Manual - Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info