820961
38
Zoom out
Zoom in
Previous page
1/60
Next page
To change or cancel this option:
1. Switch the appliance off by means of the
On/Off button.
2. Switch the appliance on again.
3. Set the programme again.
13.8 The ProSense load detection
The programme duration in the display is
referred to a medium/high load.
After setting a washing programme, the
icon lights up on the display if the
programme supports it.
After touching the Start/Pause button, the
ProSense starts the laundry load detection:
1. The appliance detects the load in the first
30 seconds: the indicator flashes, the
bars under the icon move back
and forth and the drum rotates shortly.
2. When the drum stops rotating, the display
shows the new programme duration, that
could increase or decrease, adjusted
accordingly the load detected, the
number of bars indicates the load in
quarter (from 1 to 4, 4 bars in case of
overload), the maximum declared load
indicator comes on again. After further 30
seconds, the water filling starts.
In case of in case of drum overload,
the maximum declared load indicator
comes on again with the
indicator blinking. In this case, during
these 30 seconds, it is possible to
pause the appliance and remove the
exceeding garments.
Once removed the exceeding
garments, touch the Start/Pause
button to start the programme again.
The ProSense phase can be
repeated up to three times (see point
1).
Important! If the laundry amount will not be
reduced, the washing programme starts
anyway, despite the overload. In this case, it
will be not possible to guarantee the best
washing results.
About 20 minutes after the programme
start, the programme duration could be
adjusted again depending on the
capacity of water absorption of the
fabrics.
The ProSense detection is carried out
with complete washing programmes only
(no skipping phase selected).
The ProSense is not available with some
programmes, such as Wool, programmes
with short cycles and without washing
phase.
13.9 Programme phase indicators
When the programme starts the indicator of
the running phase flashes and the other
phase indicators are steady on.
E.g. the washing or pre wash phase is
running: .
When the phase ends the relevant indicator
stops flashing and is steady on. The next
phase indicator starts flashing.
E.g. the rinse phase is running: .
If you select the Plus Steam the steam phase
indicators come on.
The steam phase is running: .
The anti-crease phase is running: .
13.10 Interrupting a programme and
changing the options
When the programme is running, you can
change only some options:
38 ENGLISH
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG L97FR16S6U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG L97FR16S6U in the language / languages: English as an attachment in your email.

The manual is 1.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG L97FR16S6U

AEG L97FR16S6U User Manual - German - 64 pages

AEG L97FR16S6U User Manual - Dutch - 60 pages

AEG L97FR16S6U User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info