527252
11
Zoom out
Zoom in
Previous page
1/32
Next page
4.8 Stain-Prewash button
8
Press button
8
to add the stain and/or
a prewash phase to a programme.
Press the button again and again to acti-
vate one or two options. The related
symbol and the indicator bar comes on
in the display.
STAIN
Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment
.
This function increases the pro-
gramme duration.
This function is not available with
a temperature lower than 40° C.
PREWASH
Use this function to add a prewash
phase before the washing phase. We
recommend that you use this function
when you have laundry with a high lev-
el of soil.
The set of this function increases
the programme duration.
4.9 Spin button
9
Press this button to:
Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set
programme.
Deactivate the spin phase.
Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
4.10 Temperature button
10
Press button
10
to change the default
temperature. When the display shows
- -, the appliance does not heat the wa-
ter.
4.11 Acoustic signals function
You can hear the acoustic signals when:
You activate the appliance.
You deactivate the appliance.
You press the buttons.
The programme is completed.
The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press button
8
and button
7
at
the same time for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate only
when you press the buttons and
when a malfunction occurs.
4.12 Child lock function
This function prevents children to play
with the control panel.
To activate the function, press button
10
and button
9
at the same time
until the display shows the symbol
.
To deactivate the function, press but-
ton
10
and button
9
at the same
time until the symbol
goes off.
You can activate the function:
Before you press the Start/Pause but-
ton
4
: the appliance cannot start.
After you press the Start/Pause button
4
, all the buttons and the pro-
gramme knob are deactivated.
4.13 Permanent extra rinse
function
With this function you can keep the extra
rinse function permanently on when you
set a new programme.
•To activate the function press button
6
and button
5
at the same time
until the display shows the symbol
.
•To deactivate the function press but-
ton
6
and button
5
at the same
time until the symbol
goes off.
ENGLISH 11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG L88409FL2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG L88409FL2 in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG L88409FL2

AEG L88409FL2 User Manual - German - 32 pages

AEG L88409FL2 Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info