820883
22
Zoom out
Zoom in
Previous page
1/64
Next page
9. BEFORE FIRST USE
During installation or before
first use you may observe
some water in the appliance.
This is a residual water left
in the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Make sure to fill the AutoDose tanks
with liquid detergent and fabric
softener . Refer to "AutoDose
basic setting " paragraph in "The
AutoDose technology" chapter.
4. Pour 2 litres of water inside the drum.
This action activates the drain system.
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
10. THE AUTODOSE TECHNOLOGY (AUTODOSING)
Read this chapter carefully.
10.1 Introduction
Right detergent and fabric softener
dosage takes better care of the laundry
and ensuring good wash performances.
Too much detergent damages your
clothes and too little doesn’t ensure good
wash performances.
This appliance is equipped with an auto
dosing system able to automatically
provide the right detergent and fabric
softener dosage to preserve the fabric
integrity and colour brightness.
AutoDose liquid detergent tank.
AutoDose fabric softener tank.
The appliance is pre-set by the factory
to suit most users habits.
Once started the programme, the
appliance will automatically release the
right amount of detergent and softener
according to the real fabric load, if
AutoDose is activated and the indicators
and/or are visible on the display.
In some programmes,
AutoDose is deactivated (the
indicators and/or are
not displayed and the
display shows OFF)
because there are garments
requiring special detergents
or treatments. If this is the
case, pour the detergent and
other treatments in the
proper manual filling
compartment.
Please refer to "AutoDose
and options compatibility
with programmes" in
"Programmes" chapter.
Further explanations on
AutoDose and activation of
advanced settings are
available downloading the
APP.
www.aeg.com22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG L86FR16S6Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG L86FR16S6Q in the language / languages: English as an attachment in your email.

The manual is 2.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG L86FR16S6Q

AEG L86FR16S6Q User Manual - German - 72 pages

AEG L86FR16S6Q User Manual - Dutch - 64 pages

AEG L86FR16S6Q User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info