820954
26
Zoom out
Zoom in
Previous page
1/44
Next page
Once removed the exceeding garments,
touch the Start/Pauze - Départ/Pause button
to start the programme again. The ProSense
System phase can be repeated up to three
times (see point 1).
Important! If the laundry amount will not be
reduced, the washing programme starts
anyway, despite the overload. In this case, it
will be not possible to guarantee the best
washing results.
About 20 minutes after the programme
start, the programme duration could be
adjusted again depending on the
capacity of water absorption of the
fabrics.
The ProSense System detection is
carried out with complete washing
programmes only (no skipping phase
selected).
The ProSense System is not available
with some programmes, such as Wol -
Laine, programmes with short cycles and
without washing phase.
12.8 Programme phase indicators
When the programme starts the indicator of
the running phase flashes and the other
phase indicators are steady on.
E.g. the washing or pre wash phase is
running: .
When the phase ends the relevant indicator
stops flashing and is steady on. The next
phase indicator starts flashing.
E.g. the rinse phase is running: .
If you select the Plus Steam the steam phase
indicators come on.
The steam phase is running: .
The anti-crease phase is running: .
12.9 Interrupting a programme and
changing the options
When the programme is running, you can
change only some options:
1. Touch the button Start/Pauze - Départ/
Pause.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Start/Pauze - Départ/
Pause again.
The washing programme continues.
12.10 Cancelling a running
programme
1. Press the button Aan/Uit - Marche/Arrêt
to cancel the programme and to
deactivate the appliance.
2. Press the button Aan/Uit - Marche/Arrêt
again to activate the appliance.
Now, you can set a new washing programme.
If the ProSense phase is already carried
out and the water filling is already
started, the new programme starts
without repeating the ProSense phase.
The water and the detergent are not
drained out in order to avoid waste. The
display shows the maximum duration of
the programme, updating it about 20
minutes after the starting of the new
programme.
12.11 Opening the door - Adding
garments
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level of the water
in the drum are too high and/or the drum
still rotates you cannot open the door.
26 ENGLISH
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG L73FR86N4V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG L73FR86N4V in the language / languages: English as an attachment in your email.

The manual is 1.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG L73FR86N4V

AEG L73FR86N4V User Manual - German - 48 pages

AEG L73FR86N4V User Manual - Dutch - 44 pages

AEG L73FR86N4V User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info