820954
25
Zoom out
Zoom in
Previous page
1/44
Next page
washing phase indicators (when available)
and an indicative programme duration.
2. To change the temperature and/or the
spin speed, touch the related buttons.
3. If desired, set one or more options by
touching the related buttons. The related
indicators come on in the display and the
given information changes accordingly.
In case a selection is not possible, no
indicator comes on and an acoustic
signal sounds.
12.5 Starting a programme with the
delay start
1. Touch this repeatedly until the display
shows the desired delay time. The
indicator comes on.
2. Touch the Start/Pauze - Départ/Pause
button.
The appliance starts the countdown of the
delay start.
When the countdown is completed, the
programme starts.
The ProSense estimation starts at the
end of the countdown.
Cancelling the delay start after the
countdown has started
To cancel the delay start:
1. Touch the Start/Pauze - Départ/Pause
button to pause the appliance. The
related indicator flashes.
2. Touch the Startuitstel - Départ Différé
button repeatedly until the display shows
.
3. Touch the Start/Pauze - Départ/Pause
button again to start the programme
immediately.
Changing the delay start after the
countdown has started
To change the delay start:
1. Touch the Start/Pauze - Départ/Pause
button to pause the appliance. The
related indicator flashes.
2. Touch the Startuitstel - Départ Différé
button repeatedly until the display shows
the desired delay time.
3. Touch the Start/Pauze - Départ/Pause
button again to start the new countdown.
12.6 Starting a programme
Touch the Start/Pauze - Départ/Pause button
to start the programme.
The related indicator stops flashing and stays
on.
The programme starts, the door is locked.
The display shows the indicator .
The drain pump can operate shortly
before the appliance fills water.
12.7 The ProSense System load
detection
The programme duration in the display is
referred to a medium/high load.
After touching the Start/Pauze - Départ/
Pause button, the maximum declared load
indicator goes off, the indicator flashes,
the ProSense System starts the laundry load
detection:
1. The appliance detects the load in the first
30 seconds, the indicator flashes. the
digit area shows and the drum
rotates shortly.
2. At the end of the load detection, the
indicator stop flashing. The
programme duration will be adjusted
accordingly and could increase or
decrease. After further 30 seconds, the
water filling starts.
At the end of the load detection, in case of
drum overload, the indicator is
flashing in the display.
In this case, for 30 seconds, it is possible to
pause the appliance and remove the
exceeding garments.
ENGLISH 25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG L73FR86N4V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG L73FR86N4V in the language / languages: English as an attachment in your email.

The manual is 1.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG L73FR86N4V

AEG L73FR86N4V User Manual - German - 48 pages

AEG L73FR86N4V User Manual - Dutch - 44 pages

AEG L73FR86N4V User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info