639673
15
Zoom out
Zoom in
Previous page
1/28
Next page
9.5 Starting a programme
without delay start
Press Start/Pause:
The indicator Start/Pause stops to
flash and stays on.
The indicator
starts to flash on the
display.
The programme starts, the door is
locked and the display shows the indi-
cator
.
The drain pump can operate for a
short time when the appliance fills wa-
ter.
After approximately 15 minutes
from the start of the programme:
The appliance adjusts auto-
matically the programme dura-
tion agree with the laundry
load.
The display shows the new val-
ue.
9.6 Starting a programme with
delay start
Press Zeitvorwahl again and again un-
til the display shows the delay you
want to set. The related indicator
comes on the display.
Press Start/Pause:
The appliance starts the countdown.
When the countdown is completed,
the programme starts automatically.
You can cancel or change the set
of the delay start before you
press Start/Pause .
To cancel the delay start:
1.
Press Start/Pause to set the appli-
ance to pause.
2.
Press Zeitvorwahl until the display
shows
’.
Press Start/Pause again to start the
programme immediately.
9.7 Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
1.
Press Start/Pause. The indicator
flashes.
2.
Change the options.
3.
Press Start/Pause again. The pro-
gramme continues.
9.8 Cancelling a programme
1.
Press Ein/Aus for some seconds to
cancel the programme and to deac-
tivate the appliance.
2.
Press the same button again to acti-
vate the appliance. Now, you can set
a new washing programme.
The appliance does not drain the
water.
9.9 Changing the options
You can change only some options be-
fore they operate.
1.
Press Start/Pause. The related indi-
cator flashes.
2.
Change the options.
3.
Press Start/Pause again. The pro-
gramme continues.
9.10 Opening the door
While a programme or the delay start
operates, the appliance door is locked
and the display shows the indicator
.
CAUTION!
If the temperature and level of
the water in the drum are too
high, you cannot open the door.
Open the appliance door when the
delay start operates:
1.
Press Start/Pause to pause the appli-
ance.
2.
Wait until the door lock indicator
goes off.
3.
Open the door.
4.
Close the door and press Start/
Pause again. The delay start contin-
ues to operate.
Open the appliance door when the
programme operates:
1.
Press Ein/Aus for some seconds to
deactivate the appliance.
2.
Wait for some minutes and then
open carefully the appliance door.
ENGLISH 15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG L7347FL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG L7347FL in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG L7347FL

AEG L7347FL User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info