775872
24
Zoom out
Zoom in
Previous page
1/44
Next page
The ProSense System is not
available with all
programmes such as : Wol
and programmes with short
cycles.
10.8 Starting a programme
with the delay start
1. Press the Startuitstel button again
and again until the display shows the
number of minutes or hours of delay.
The related indicator comes on.
2. Press the Start/Pauze button.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press the Start/
Pauze button to start the
appliance, you can cancel or
change the set of the delay
start.
10.9 Cancelling the delay
start
To cancel the delay start:
1. Press the Start/Pauze button to set
the appliance to pause.
The related indicator flashes.
2. Press the Startuitstel button
repeatedly until the display shows .
3. Press the Start/Pauze button again to
start the programme immediately.
10.10 Interrupting a
programme and changing a
option
You can change only some options
before they operate.
1. Press the Start/Pauze button.
The related indicator flashes.
2. Change the option set.
3. Press the Start/Pauze button again.
The programme continues.
10.11 Cancelling a running
programme
1. Press the Aan/Uit button to cancel
the programme and to deactivate the
appliance.
2. Press the Aan/Uit button again to
activate the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.12 Opening the door
If the temperature and level
of the water in the drum are
too high and/or the drum still
rotates you cannot open the
door.
While a programme or the delay start
operates, the appliance door is locked.
1. Press the Start/Pauze button .
In the display the related door lock
indicator goes off.
2. Open the appliance door.
3. Close the door and press the Start/
Pauze button .
The programme or the delay start
continues.
10.13 End of cycle
When the programme has finished, the
appliance stops automatically. The
acoustic signal operates.
In the display comes on and the door
locked indicator goes off.
The indicator of the Start/Pauze button
goes off.
1. Press the Aan/Uit button to
deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
www.aeg.com24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG L6WBN86JW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG L6WBN86JW in the language / languages: English as an attachment in your email.

The manual is 1.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG L6WBN86JW

AEG L6WBN86JW User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info