770270
25
Zoom out
Zoom in
Previous page
1/44
Next page
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the Start/
Pauze - Départ/Pause button.
The programme or the delay start
continues.
4. The door can be opened when the
programme is complete, or set
spinning or draining programme/
option and than press Start/Pauze -
Départ/Pause button.
12.12 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Start/Pauze - Départ/
Pause button goes off.
The door unlocks and the indicator
goes off.
1. Press the Aan /Uit - Marche/Arrêt
button to deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last
selected programme. Turn
the programme dial to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
12.13 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
The display shows the door locked
indicator
The drum still turns at regular
intervals to prevent the creases in the
laundry.
The door stays locked.
You must drain the water to open the
door:
1. If necessary, touch the Centrifugeren
- Essorage button to decrease the
spin speed proposed by the
appliance.
2. Press Start/Pauze - Départ/Pause to
continue the cycle
3. When the programme is completed
and the door locked indicator
goes off, you can open the door.
4. Press the Aan /Uit - Marche/Arrêt
button a few seconds to deactivate
the appliance.
In any case, the appliance
empties the water out
automatically after
approximately 18 hours.
12.14 Stand-by option
The Stand-by function automatically
deactivates the appliance to decrease
the energy consumption when:
You do not use the appliance for 5
minutes before you touch the Start/
Pauze - Départ/Pause button.
Press the button Aan /Uit - Marche/
Arrêt to activate the appliance again.
After 5 minutes from the end of the
washing programme
Press the Aan /Uit - Marche/Arrêt
button to activate the appliance again.
The display shows the end of the last
set programme.
ENGLISH 25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG L6FB586CBS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG L6FB586CBS in the language / languages: English as an attachment in your email.

The manual is 1.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG L6FB586CBS

AEG L6FB586CBS User Manual - German - 44 pages

AEG L6FB586CBS User Manual - Dutch - 44 pages

AEG L6FB586CBS User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info