639918
14
Zoom out
Zoom in
Previous page
1/24
Next page
If you set something
incorrect, the display shows
the message .
10.7 Starting a programme
without the Finish In option
Touch the button Start/Pause .
The indicator of the button Start/
Pause stops to flash and stays on.
The programme starts, the door
locks, the indicator is on.
The drain pump can operate for a
short time at the beginning of the
washing cycle.
After approximately 15
minutes from the start of the
programme:
The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
The display shows the
new value.
10.8 Starting a programme
with the Finish In option
1. Touch the button Finish In again and
again to choose the number of hours
in which you want the washing cycle
to be finished.
The display shows the number of hours
you set (e.g.
) and the indicator above
the button Finish In is on to show that his
option is active.
2. Touch the button Start/Pause :
The door is locked.
The appliance starts the
countdown.
When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the Finish In
option before you touch the
button Start/Pause . After
touching the button Start/
Pause you can only cancel
the Finish In option.
To cancel the Finish In option:
a. Touch the button Start/Pause to
set the appliance to pause. The
indicator of button Start/Pause
flashes.
b. Touch the button Finish In until
the indicator above this button
goes off.
Touch the button Start/Pause
again to start the programme
immediately.
10.9 Interrupting a
programme and changing the
options
You can change only some options
before they operate.
1. Touch Start/Pause .
The indicator of this button flashes.
2. Change the options. If you change
any option the Finish In option (if set)
will be disabled.
3. Touch Start/Pause again.
The programme continues.
10.10 Cancelling a running
programme
1. Press the button On/Off for some
seconds to cancel the programme
and to deactivate the appliance.
2. Press the same button again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.11 Opening the door
While a programme (or the Finish In)
operates, the appliance door is locked.
The indicator is on.
CAUTION!
If the temperature and level
of the water in the drum are
too high, you cannot open
the door.
www.aeg.com14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG L68470VFL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG L68470VFL in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG L68470VFL

AEG L68470VFL User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info