820953
5
Zoom out
Zoom in
Previous page
1/40
Next page
2. SAFETY INSTRUCTIONS
2.1 Installation
The installation must comply with
relevant national regulations.
Remove all the packaging and the transit
bolts including rubber bush with plastic
spacer.
Keep the transit bolts in a safe place. If the
appliance is to be moved in the future they
must be reattached to lock the drum to
prevent an internal damage.
Always take care when moving the
appliance as it is heavy. Always use safety
gloves and enclosed footwear.
Follow the installation instructions supplied
with the appliance.
Do not install or use a damaged
appliance.
Do not install or use the appliance where
the temperature can be less than 0°C or
where it is exposed to the weather.
The floor area on which the appliance is to
be installed must be flat, stable, heat
resistant and clean.
Make sure that there is air circulation
between the appliance and the floor.
When the appliance is in its permanent
position, check if it is levelled correctly
with the aid of a spirit level. If it is not,
adjust the feet accordingly.
Do not install the appliance directly above
a floor drain.
Do not spray water on the appliance and
do not expose it to excessive humidity.
Do not install the appliance where the
appliance door cannot be fully opened.
Do not put a closed container to collect
possible water leakage under the
appliance. Contact the Authorised Service
Centre to ensure which accessories can
be used.
2.2 Electrical connection
WARNING!
Risk of fire and electric shock.
WARNING: This appliance is designed to
be installed / connected to a grounding
connection in the building.
Always use a correctly installed
shockproof socket.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to the
mains plug and to the mains cable. Should
the mains cable need to be replaced, this
must be carried out by our Authorised
Service Centre.
Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
Do not touch the mains cable or the mains
plug with wet hands.
Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
2.3 Water connection
The inlet water shall not exceed 25 °C.
Do not cause damage to the water hoses.
Before connection to new pipes, pipes not
used for a long time, where repair work
has been carried out or new devices fitted
(water meters, etc.), let the water flow until
it is clean and clear.
Ensure that there are no visible water
leaks during and after the first use of the
appliance.
Do not use an extension hose if the inlet
hose is too short. Contact the Authorised
Service Centre for the replacement of the
inlet hose.
When unpacking the appliance, It is
possible to see water flowing from the
drain hose. This is due to the testing of the
appliance with the use of water in the
factory.
You can extend the drain hose to
maximum 400 cm. Contact the Authorised
Service Centre for the other drain hose
and the extension.
ENGLISH 5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG L63FR84N4B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG L63FR84N4B in the language / languages: English as an attachment in your email.

The manual is 1.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG L63FR84N4B

AEG L63FR84N4B User Manual - German - 48 pages

AEG L63FR84N4B User Manual - Dutch - 44 pages

AEG L63FR84N4B User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info