546464

AEG KRC 4330 DVB-T Manual

28
Zoom out
Zoom in
Previous page
1/38
Next page
Search and edit channels
In order to quickly search a channel or to change
the features of saved channels, select the "SETUP/
Installation" submenu.
Automatic channel search (Auto/Scan):
Start the automatic channel search with the "OK"
button.
All available channels will be searched and stored in
a programme slot. Previously stored channels will
be erased.
Manual search (Manual Scan):
The individual settings for a station can be carried
out in this menu. For this method, it is necessary
to know the searched-for programme’s channel
number, frequency and bandwidth.
Press the "green" button to call up the "Manual
Scan" menu.
For changing the settings, use the "
▼
VOL-" and
"
▲
VOL+" arrow buttons.
After having carried out all settings, the search
run is activated by pressing the "OK" button.
All channels found in the area will be stored in a
programme slot.
Child Protection/Password
(PIN code)
In the "Password", you can carry out the following
settings:
• the"MenuLock"(SetupMenuLock),
• setthe"channellock"(childlock),
• setthe"censorshiplock",
• changingthepassword.
Menu Lock (Setup Menu Lock),
In this menu you can set whether the password has
to be entered in order to call up the SETUP menu.
Child Lock
In the "TV/TV List" menu (see page 30) you can
block individual channels. With the "channel lock"
function you can switch this lock on and off.
If you would like to switch on the child lock, select
the "on" option.
If you would like to switch off the child lock, select
the "off" option.
Censorship Lock
In this menu you can choose between:
• "Noblock"
• "Totalblock"=allchannelsandsomemenu
options can only be released after the password
has been entered.
• "2" to "18" =Hereyoucandeterminethedesired
age rating. This function must be supported by
the channel, which must transmit appropriate
data.
Changing the password
You may change the password (PIN code) set in the
factory and enter any other four-digit number as
your personal PIN code. The password "0000" has
been pre-programmed in the factory.
Enter the old password (PIN) using the numercal
keys.
Enter the new password using the numercal keys.
Enter the new password again.
The information window "PIN code changed"
appears.
Pressthe‘OK’keytoconfirm.
The new password is integrated.
Factory defaults
Select the "Set Default" submenu in the
"SETUP" menu by using the "▼CH-"and
"▲CH+"arrowbuttons.
Pressthe‘OK’keytoconfirm.
You will be prompted to confirm your selection.
Press the "OK" button if you would like to return
the receiver back to the factory settings.
Press the "EXIT" button if you would like to exit
the menu.
Wait until the receiver re-starts.
This process may take a few minutes.
The installation menu then appears.
Press the "EXIT" key to return to the TV channel.
English
28
NOTE:
• Noteyournewpassword;oncechanged,only
the new code is valid for all password queries.
• Ifyou'veforgottenyourpersonalpassword,you
can assign a new password by means of the
master password "8888".
NOTE:
The receiver is reset to its condition on delivery.
All of your settings and stored data are deleted.
AEG_KRC_4330.indd 28 10.09.2009 13:24:59 Uhr
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG KRC 4330 DVB-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG KRC 4330 DVB-T in the language / languages: English, German as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info