697604
7
Zoom out
Zoom in
Previous page
1/58
Next page
7
www.aeg.com
GB
DE
AR
ES
FA
FR
IT
NL
PT
under the attachment
Caution: Before attaching accessories turn o the appliance and unplug it.
11 Place the food tray over the grinder housing. Cut raw meat into small pieces and place it on the food tray. Plug in
the appliance and turn the speed selector to desired speed (recommended speed: 3-4). Feed the meat into the feed
chute by using the pusher.
Caution: Do not put your ngers or other utensils in the feed chute.
Note: Meat should not contain bones, muscles or skin.

12 Choose a cylindrical slicer (medium or course) or a shredder knife. Insert the attachment by turning it clockwise
into the slicer/shredder housing. Make sure the attachment is fully inserted.
Caution: The blades and inserts are very sharp!
13 Push down the release button for the front attachment hub to the right and remove the attachment hub cover.
Fit the power shaft of the attachment in the front attachment hub socket, using the attachment hub release button.
Assemble the slicer/shredder in the attachment hub. The attachment release button will click into position once
the slicer/shedder is securely attached. Place a container under the attachment.
Cut the food into small pieces. Plug in the appliance and turn the speed selector to desired speed
(recommended speed: 5).
14 Feed the food into the feed chute by using the pusher. When nished using your attachment, turn o the appliance
and unplug it. Place the front attachment hub cover using the attachment hub release button.
HOW TO USE THE BLENDER*
15 Remove the rear attachment hub cover by pulling it straight backwards. Place the bottom of the blender on the
three rubber rings. Align the arrows on the blender to the arrows on the main body.
Caution: Turn o and unplug the appliance before attaching any accessories.
16 Rotate the blender clockwise to lock it in position. The blender handle should point towards the back of the ma-
chine when properly xed. Place the
blender lid and measuring cup.
Insert the plug in the main socket.
Adjust the speed selector to the desired speed (recommended speed: 6), mix until the right consistency of the blend
is reached.
Caution: Never operate blender without ingredients.
CLEANING AND CARE
17 Unplug the appliance. The wire whip, meat grinder* and slicer/shredder* should only be washed by hand in warm
soapy water.
The bowl, at beater and dough hook are dishwasher-proof. Only place parts on the top rack if using a dish-
washer.
Caution! The blades and inserts are very sharp and can cause injury.
Warning! Never immerse the housing, plug, or cord in water or any other uid.
Dry each part thoroughly before use.
18 Cleaning the blender*:
Rotate the blender counter-clockwise and remove. Take o the lid. Pour out the mixture from the blender.
Add a drop of dishwashing soap and one litre of warm water. Fix the blender on the appliance.
Run the machine on speed 6 for half a minute, then pour out the water. Rinse the blender and let it dry.
Caution! The blades and inserts are very sharp and can cause injury.
19 The housing should only be cleaned with a soft damp cloth, then dried with a cloth.
Note: Do not use abrasive cleansers or scouring pads to clean the surfaces of your appliance.
Enjoy your new AEG product!
EKM3xxx_Kitchen Machine_Electrlx - elias aeg.indd 7 2017-05-24 17:06:05
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG KM3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG KM3200 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info