690252
7
Zoom out
Zoom in
Previous page
1/24
Next page
6 7
EN
corresponds to the value indicated on the rating plate on the
bottom of the appliance.
Connect the appliance to an eciently earthed and correctly in-
stalled socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualied pro-
fessional.To comply with safety directives, an omnipolar switch
with a minimum contact distance of 3 mm must be installed.
Do not use multiple sockets or extensions.
Important! Safety cutout devices must be included
in the mains power supply in compliance with the installation
regulations in the country concerned.
Disposing of the appliance
The appliance must not be disposed of with household
waste, but taken to an authorised waste separation
and recycling centre.
USING THE APPLIANCE FOR THE
FIRST TIME
• Coeehasbeenusedtofactorytesttheapplianceanditis
therefore completely normal for there to be traces of coee
in the mill.
• Customisewaterhardnessassoonaspossiblefollowingthe
instructions in the “Setting water hardness” section.
1. Connect the appliance to the mains supply.
Set the required language.
2. To set the language, use the icons (B7 and B8) to
choose the required language (g. 2). When the message
“PRESS OK TO CHOOSE ENGLISH” is displayed, press the OK
icon (B9) (g. 3) for 3 seconds until “ENGLISH INSTALLED”
is displayed. If you set the wrong language, follow the in-
structions in the “Setting the language” section.
If your language is not available, select one from those dis-
played. The instructions refer to the English version.
Then follow the instructions displayed:
3. After 5 seconds, the appliance displays “FILL TANK. Extract
the water tank (g. 4), rinse and ll with fresh water with-
out exceeding the MAX line. Replace and push as far as it
will go.
4. Place a cup under the hot water spout (g. 5). (If the hot
water spout is not inserted, the appliance displays “INSERT
WATER SPOUT”. Attach it as shown in gure 5.
The appliance displays: “HOT WATER PRESS OK”.
Press the OK icon (B9) (g. 6) and after a few seconds a little
water comes out of the spout.
5. The machine now displays “TURNING OFF... PLEASE WAIT”
and goes o.
6. Extract the appliance by pulling it out using the handles
(g. 9). Open the lid and ll the container with coee
beans, then close the lid and push the appliance in.
The coee maker is now ready for normal use.
Important! Never introduce pre-ground coee, freeze
dried coee, caramelised beans or anything else which could
damage the appliance.
N.B.! When using the appliance for the rst time, you
need to make 4-5 cups of coee and 4-5 cappuccinos before the
appliance gives satisfactory results.
N.B.! Each time you turn the coee maker on by the ON/
OFF switch (A23), it performs a SELF-DIAGNOSIS cycle and then
goes o. To turn it on again, press the ON/OFF button (A7) (g. 7)
TURNING ON AND HEATING UP
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The appli-
ance is ready for use only after completion of this cycle.
Danger of burns! During rinsing, a little hot water
ows from the coee spouts.
To turn the appliance on, press the ON/OFF/stand-by button (A7)
(g. 7). The message “HEATING UP... PLEASE WAIT” is displayed.
When heating is complete, the message changes to “RINSING”;
The appliance is at temperature when the message “MEDIUM
CUP NORMAL TASTE” is displayed.
If no icon is pressed within about 2 minutes, the time (if set, see
the “Setting the clock section) is displayed.
If the time has not been set, the appliance displays the last func-
tions set.
When any icon is pressed, “MEDIUM CUP NORMAL TASTE” is dis-
played again. The appliance is ready to make coee again.
MAKING COFFEE USING COFFEE
BEANS
1. The appliance is preset to make coee with a normal taste.
You can also choose coee with an extra-mild, mild, strong
or extra-strong taste. There is also a pre-ground coee op-
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG KKE884500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG KKE884500 in the language / languages: English as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG KKE884500

AEG KKE884500 User Manual - German - 24 pages

AEG KKE884500 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info