697623
6
Zoom out
Zoom in
Previous page
1/32
Next page
6
www.aeg.com
ENGLISH
Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. ON/OFF switch with power indicator light
B. Water tank
C. Water level indicator
D. Hinged lid
E. Filter holder with anti-drip valve
F. Coee jug with graduation on both sides
G. Warming plate
H. Power cord & plug
Picture page 2-3
GETTING STARTED
1 Place the machine on a at surface. When starting the machine for the rst time, ll the tank with cold water. Start the
machine with the ON/OFF switch. Let a full tank of water pass through the machine once or twice to clean it, without
using paper lter or coee.
2 Making coee: open the lid and ll the water tank with fresh cold water up to the desired level. There is a gauge for cups on
the water tank and on the coee jug. (The machine must not be used with empty tank!)
3 Insert a size 1x4 paper lter in the lter holder and ll it with ground coee. For average strong coee one measuring
spoon (approx. 6-7 g) per cup is suicient. Close the water tank lid and place the jug (complete with lid) onto the warming
plate.
4 Start the machine with the ON/OFF switch. The power indicator light will come on and hot water will ow into the lter.
When water has stopped owing, the warming plate keeps the coee hot until the machine is turned o with the ON/OFF
switch. If the machine is not turned o manually, the Safety Auto-O function turns it o after 40 minutes.
5 If the jug is removed, the lter valve prevents coee from dripping onto the warming plate. (While boiling, the jug must not
be removed for longer than 30 seconds or the lter will overow.)
CLEANING AND CARE
6 Turn the machine o and unplug the power cord. Wipe all outer surfaces with a damp cloth. Coee jug and jug lid are
dishwasher proof. Never use caustic or abrasive cleaners, and never immerse the machine in liquid!
7 To clean the lter holder, lift up the handle and remove the lter holder. To clean the lter valve thoroughly, rotate it several
times while it is being rinsed.
8 Decalcifying is recommended regularly, depending on water hardness. Fill the tank with water and decalcier according to
product instructions, then follow steps 9 and 10.
9 Place the coee jug with its lid onto the warming plate. Allow the decalcier to take eect for about 15 minutes, then switch
the machine on. Switch it o when the solution has nished owing through. If necessary repeat the decalcifying process.
10 Allow the machine to run at least twice with plain water. Then thoroughly rinse the coee jug, lid and lter holder under
running water, activate the lter valve repeatedly during the rinse process.
Enjoy your new AEG product!
KF33xx_CoffeeMaker_AEG_NEW.indd 6 2017-06-05 11:19:18
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG KF33XX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG KF33XX in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info