Manual AEG IR Premium 1500 IP 44A (page 13 of 28) (English, German, Dutch, French)

648411

Zoom out

Zoom in

1/28

Installation – for qualied contractors

INSTALLATION

6. Safety

Only a qualied contractor should carry out installation,

commissioning, maintenance and repair of the appliance.

6.1 General safety instructions

We guarantee trouble-free function and operational relia-

bility only if original accessories and spare parts intended

for the appliance are used.

6.2 Instructions, standards and regulations

Note

Observe all applicable national and regional regula-

tions and instructions.

Note

When installing the appliance in rooms with a bath

and/or shower, observe the safety zone in accord-

ance with the details on the type plate.

7. Appliance description

7.1 Standard delivery

The following are delivered with the appliance:

◦ Wall mounting bracket (incl. xing screw and nut)

7.2 Special accessories

◦ IR Funk Dimmer 2000

◦ IR Funk W

◦ IR Funk S

◦ IR Funk Multi BiDi

◦ IR Strebenklemme (brace clamping bracket)

8. Installation

8.1 Installation conditions and

preparations

CAUTION Injury

Install the appliance out of the reach of children.

◦ Never install this appliance on or below combustible

materials.

◦ Never install the appliance directly below a socket.

◦ Install the appliance on the wall or ceiling.

◦ Observe the specied minimum clearances (see

chapter "Specication / Dimensions"). This appli-

ance gives off radiated heat. Therefore ensure that

there are no objects between the appliance and the

person or objects to be heated, such as furniture, for

example.

◦ Wood ceilings may become hot even if the minimum

clearances are observed. Dark spots or ne shrink-

age cracks on wooden ceilings may therefore occur.

8.2 Power supply

WARNING Electrocution

Carry out all electrical connection and installation

work in accordance with relevant regulations.

WARNING Electrocution

Ensure the appliance can be separated from the

power supply by an isolator that disconnects all

poles with at least 3 mm contact separation.

An external socket must be able to be isolated from

the power supply across all poles.

Always equip the supplying power circuit of the ap-

pliance with an RCD (nominal earth leakage current

≤ 30 mA).

Note

Observe the type plate. The specied voltage must

match the mains voltage.

Only connect the appliance to a correctly installed mains

socket.

We recommend a dedicated fuse for this appliance (see

chapter "Specication / Data table"). From 3600 W up-

wards, only ever connect one appliance per fuse.

8.3 Appliance installation

Note

Check in chapter “Specication / Data table” wheth-

er you are able to install the appliance vertically or

horizontally.

» Secure the mounting bracket on the wall or ceiling

using suitable xing materials.

» Secure the appliance to the mounting bracket using

the screw and nut provided.

» Route the power cable from the appliance either to-

wards the back, top or bottom.

8.4 Adjusting the tilting angle

The tilting angle can be adjusted over a range of 100°.

We recommend a setting of 45°.

CAUTION Burns

If the appliance is already in use, let it cool down

before adjusting the tilting angle.

» Undo both screws on the pivot hinge.

» Set an appropriate tilting angle.

» Retighten the two screws again.

Material losses

Ensure that the appliance does not come into con-

tact with the power cable.

8.5 Dismantling

» Pull the mains plug out of the socket.

CAUTION Burns

First allow the appliance to cool down before trans-

porting or storing it.

» Remove the appliance from the wall mounting

bracket.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG IR Premium 1500 IP 44A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG IR Premium 1500 IP 44A Manual

Product: