697886
11
Zoom out
Zoom in
Previous page
1/36
Next page
5.5 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
III / II / I There is a risk of
burns from residual heat.
The indicator shows the level
of the residual heat.
The induction cooking zones produce
the heat necessary for the cooking
process directly in the bottom of the
cookware. The glass ceramic is heated by
the heat of the cookware.
6. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
6.1 Using the display
Only the backlit symbols can be used.
To activate a given option, touch the
relevant symbol on the display.
The selected function is activated
when you remove the finger from the
display.
To scroll the available options, use a
quick gesture or drag your finger
across the display. The speed of the
gesture determines how fast the
screen moves.
The scrolling can stop by itself or you
can stop it immediately if you touch
the display.
You can change most of the
parameters shown on the display
when you touch the relevant symbols.
To select the required function or
time you can scroll through the list
and / or touch the option you want to
choose.
When the hob is activated and some
of the symbols disappear from the
display, touch it again. All the symbols
come back on.
For certain functions, when you start
them, a pop-up window with
additional information appears. To
deactivate the pop-up window
permanently, check
before you
activate the function.
Select a zone first to activate the timer
functions.
Symbols useful for display navigation
To confirm the selection or setting.
Symbols useful for display navigation
To go back / forwards one level in
the Menu.
To scroll up / down the instructions
on the display.
To activate / deactivate the op-
tions.
To close the pop-up window.
To cancel a setting.
6.2 First connection to the
mains
When you connect the hob to the mains
you have to set Language, Display
Brightness and Buzzer Volume.
You can change the setting in Menu >
Settings > Setup. Refer to "Daily use".
6.3 Food Sensor calibration
Before you start using the Food Sensor
you need to calibrate it, to ensure that
the temperature readings are correct.
Once the Food Sensor is calibrated
properly, it measures the temperature at
the boiling point with the tolerance
range of + / - 2 °C.
Follow the procedure when:
you install the hob for the first time;
you move the hob to a different
location (change of altitude);
you replace the Food Sensor.
ENGLISH
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG IAE84881XB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG IAE84881XB in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG IAE84881XB

AEG IAE84881XB User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info