463095

AEG HS 50 Manual

6
Zoom out
Zoom in
Previous page
1/68
Next page
6
ENGLISH
HS 40, HS 50, HS 60, HS 70
Leaf hedges: June and October.
Pine hedges: April and August.
Fast growing hedges: from May every 6 weeks.
Always keep the machine in the storage
sheath. The storage sheath can also be
mounted on a wall.
Never clean the machine with water.
After cutting resin-containing hedges clean blades with a resin solvent spray.
Always disconnect the plug from the socket before carrying out any work on the
machine.
Should the blades become blunt or damaged they can be exchanged for a set of
new ones. Dismantle blade assembly as stated below and send it to the AEG
Service Centre.
Before changing the blade assembly, make sure that blades are in a symmetrical
position. If not, let the machine run again.
The change of blades can be effected with the protection sheath in place. This
prevents injuries and keeps the hands clean.
1. Turn machine around, the underside
pointing upwards.
2. Remove 6 screws (A) and the gearbox lid
(B).
To loosen the screws, only use Torx
screwdrivers.
3. Undo the two locking screws (C).
4. Pull out the blade assembly (D).
5. The assembly is done in reverse order.
Observe that the heart shaped profiles of
the eccentric drive (E) and the driving
sleeve (F) fit together.
Use only AEG accessories and spare parts. Should components need to be
replaced which have not been described, please contact one of our AEG service
agents (see our list of guarantee/service addresses).
Please clean the cutting blades after each use. For easy and quick care of the
blades we recommend to spray the blades with cleansing agent. This keeps up the
cutting efficiency.
Cutting time
Storage and
transport
Cleaning
Changing the
blades
Maintenance
Torx TX 20
Torx TX 25
A
F
E
D
C
B
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG HS 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG HS 50 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info