463095
2
Zoom out
Zoom in
Previous page
1/68
Next page
2
ENGLISH
HS 40, HS 50, HS 60, HS 70
You demand the best and buy quality – quality provided by Atlas Copco.
We have built for you a reliable and lasting tool. Working effectively and without
endangering your health is only possible if these instructions for use are being read
carefully before first using this tool. We want to satisfy our customers and would like
you to buy again AEG Electric Power Tools from Atlas Copco.
HS 40 HS 50 HS 60 HS 70
Nominal power 500 W 500 W 500 W 500 W. . . . . . . . . . . . . . . . . . . . . . . .
No–load spead 2600 min
-1
2600 min
-1
2600 min
-1
2600 min
-1
. . . . . . . . . . .
Cutting length 40 cm 50 cm 60 cm 70 cm. . . . . . . . . . . . . . . . . . . . . . . . . . .
Cutting capacity max. dia. 20 mm 20 mm 20 mm 20 mm. . . . . . . . . . . . . .
Distance between teeth 26 mm 26 mm 26 mm 26 mm. . . . . . . . . . . . . . . .
Weight 3,6 kg 3,7 kg 3,8 kg 3,9 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J Please pay attention to the safety instructions in the attached leaflet!
J Always disconnect the plug from the socket before carrying out any work on the
machine.
J Appliances used at many different locations including open air must be connected
via a current surge preventing switch.
J Always wear goggles when using the machine. It is recommended to wear gloves,
sturdy non slipping shoes and apron.
J Sawdust and splinters must not be removed while the machine is running.
J Before use check machine, cable, and plug for any damages or material fatigue.
Repairs should only be carried out by authorised Service Agents.
J Only use splash proof extension cables approved for outdoor purposes.
J Keep mains lead clear from working range of the machine. Always lead the cable
away behind you.
J No person under 16 years of age is allowed to operate the machine.
J Do not pierce the motor housing as this could damage the double insulation (use
adhesives).
J Never hold the machine by the blades. It should be transported and kept in the
storage sheath.
J During operation the machine must be guided with both hands while keeping a safe
footage.
J Should blades be blocked (for instance by big branches), disconnect machine by
pulling the plug and remove the obstacle.
J Use trimmer only for cutting hedges and shrubs.
J Do not use trimmer in rain or on wet hedges.
J Typically the A-weighted sound pressure level of the tool is 85 dB (A).
The noise level when working can exceed 85 dB (A).
Wear ear protectors!
J Typically the hand-arm vibration is below 2.5 m/s
2
.
The hedgetrimmer is suitable for trimming and shaping of hedges, bushes and
shrubs. It can also shred garden refuse for composting.
Do not use this product in another way as stated for normal use.
Introduction
Technical Data
Advice for your
safety
Measured sound
value
Measured
vibration value
Use
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG HS 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG HS 50 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info