464402

AEG HS 204 ST Manual

5
Zoom out
Zoom in
Previous page
1/32
Next page
5
English
Electrical connection
Prior to connecting the appliance to a source of electricity, check
carefully that the electric voltage in your home matches the voltage
rating of the appliance and that the mains wall socket and the mains
supply are adequate for operating it.
Start up
●
A smell may develop for a short time after switching on the
appliance for the first time and after an extended period of
non-use.
●
To use, insert the plug in the socket.
Controls
1. Rotary selector switch 0 / / 1 / 2
2. Thermostat rotary switch
(to HS 203 T and HS 204 ST)
3. On-indicator pilot lamp / indicator lamp
ON/OFF (0/ /1/2) rotary selector switch
Functions of the rotary selector switch
The functions are selected by turning the rotary switch to the required
position.
0 OFF
Only fan on (cold)
1 Stage 1: 1000 watt heater output
2 Stage 2: 2000 watt heater output
The fan mode or the heater output is set using the rotary selector
switch.
Thermostat rotary switch
(applies only to HS 203 T and HS 204 ST)
The room temperature can be set to between 0 °C and 45 °C with this
rotary switch. Set the thermostat to “max.” in order to maintain a
certain room temperature. Operate the appliance at full power until
the required room temperature is reached. Reset the thermostat until
the appliance switches off with an audible “click”. The set temperature
will be kept almost constant by the appliance switching on and off
automatically.
Please note that the appliance does not switch on unless the
thermostat setting is higher than the room temperature.
Frost protection
●
Set the thermostat to ✽ and the rotary selector switch to the
required heater output.
●
The appliance switches on automatically when the temperature falls
below +5 °C…+8 °C.
Operating and Installation instructions
Tilt protection
The AEG fan heater is designed to automatically shut off when tipped
forward or backward. When returned to normal upright position heat
will automatically come on again. This is a safety feature to avoid
possibility of fire should the unit be accidentally upset.
Overheat cut-out
The built-in overheat cut-out switches the appliance off automatically
when a fault develops! Switch off the appliance (set the rotary switch
to “0” and the thermostat to ✽) or unplug the mains plug from the
socket. After a short cooling down phase (20 minutes) the appliance is
ready for re-use. Consult your authorised dealer or your after-sales
service department if the fault re-occurs!
Cleaning
●
Before starting, switch off the appliance and unplug the mains plug
from the socket!
●
Clean the housing with a damp cloth, a vacuum cleaner or a dusting
brush.
●
Do not use any scouring or caustic cleansing agents!
●
Never use highly inflammable cleansing agents such as, for example,
benzine or spirit to clean the appliance.
●
Never immerse the appliance in water! Danger to life!
●
Clean the intake and blower section regularly with a vacuum
cleaner.
●
If the appliance is not used for an extended period it must be
protected against excessive dust and dirt.
Environment and recycling
Please help us to protect the environment by disposing of the
packaging in accordance with the national regulations for waste
processing.
Recycling of obsolete appliances
Make the appliance unusable by cutting through the power cord
before disposing of it.
Appliances with this label must not be disposed off with the
general waste. They must be collected separately and disposed
off according to local regulations.
After sales service
All repairs must be referred to authorised specialists.
Therefore consult an authorised dealer or an after-sales service
department.
Any tampering with the appliance will invalidate the warranty.
Improper repairs can cause grave hazards for the user!
The right of design or configuration changes is reserved in the
interests of technical advancement.
Technical data
Model no. HS 203 HS 203 T HS 204 S HS 204 ST HS 205 B
Connection 230-240V/50 Hz 230-240V/50 Hz 220-240V/50 Hz 220-240V/50 Hz 230-240V/50 Hz
Wattage (W) 2000 2000 2000 2000 2000
Current (A) 8.7 8.7 8.7 8.7 8.7
Dimensions (mm) 245 x 135 x 260 245 x 135 x 260 203 x280 x 154 203 x 280 x 154 250 x 205 x 116
Net weight 1.28 kg 1.35 kg 1.49 kg 1.52 kg 1.40 kg
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG HS 204 ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG HS 204 ST in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info