463091

AEG H 750 Manual

5
Zoom out
Zoom in
Previous page
1/50
Next page
4
ENGLISH
H 500, H 750, HB 750, HBE 800
With setting wheel.
The notches represent 0,1 mm cutting
depth.
In setting ”P” (parking) the planer blades
are recessed in the housing.
A dust bag or suction hose with adaptor
can be attached to the machine for
sawdust removal with an wet- and- dry
vacuum cleaner.
*Not included in standard equipment,
available as an accessory.
The planing/chamfering width can be set
on the scale after attaching the rip fence.
*Not included in standard equipment,
available as an accessory.
The chamfering depth of 0–16 mm can be
set on the chamfering depth gauge.
*Not included in standard equipment,
available as an accessory.
Never reach into the danger area of the plane when it is running.
Place the front page of the machine on to the worpiece and switch on, before the
planer blade touches the workpiese. The selv opening swivel guard closes itself
when the machine is lifted, but can laso be effected with lever and then guide evenly
over the workpiece.
The v–shape notch in the front of the supporting plate ensures safe chamfering of
edges.
To adjsut cutting depth first set on ”P”. Then adjust to the necessary setting
according to required chamfering depth.
The ventilation slots of the machine must be kept clear at all times.
If the shavings discharge is stained with resin, remove it with a cloth soaked in
turpentine substitute.
In order to guarantee constant readiness for operation, the machine should be
checked for worn carbon brushes at one of the AEG after–sales service agencies.
Use only AEG accessories and spare parts. Should components need to be
replaced which have not been described, please contact one of our AEG service
agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the ten–digit
No. as well as the machine type printed on the label and order the drawing at your
local service agents or directly at: Atlas Copco Electric Tools GmbH, Postfach 320,
D–71361 Winnenden.
Setting the
planing depth
Sawdust removal
(Accessory*)
Parallel fence
(Accessory*)
Chamfering
depth gauge
(Accessory*)
Advice for
operation
Maintenance
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG H 750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG H 750 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info