648395
112
Zoom out
Zoom in
Previous page
1/125
Next page
PAGE 48
© 2016 OJ Electronics A/S
Sensor Type
This option allows you to choose the type of floor sensor used with the thermostat.
You can therefore choose to use an existing sensor with the thermostat, e.g. in
renovation projects.
Choose the sensor actually used from the list. The sensor supplied with the thermostat
is an OJ sensor listed as: “Factory”.
• Factory (default)
• Sensor 10 kΩ
• Sensor 12 kΩ
• Custom
1. Tap the “Menu” button on the home screen.
2. Then tap the “Engineer Settings” button.
3. Scroll down and tap the “Sensor Type” button.
4. Tap the type of floor sensor actually used.
5. Confirm your choice with “” or discard it with “X”.
6. If Custom” is chosen, you must provide resistance values for the sensor
concerned at four given temperatures: 15°C, 20°C, 25°C and 30°C – ask the
supplier of your sensor for these values.
7. Use the “Right Arrow” or “Left Arrow” button to toggle through the temperatures.
8. Tap the resistance value to change it.
9. Tap the “Up Arrow” or “Down Arrow” button to set the resistance.
10. Then repeat steps 6-9 until all four resistance values have been set.
11. Tap the “Left Arrow” button to return to “Engineer Settings”.
You have now set up
your custom sensor
Mon 11:15
17:00
23.5
°
Manual Other...
1
Mon 11:15
17:00
23.5
°
Manual Other...
1
Heating Schedule
Energy Use
User Settings
Engineer Settings
Heating Schedule
Energy Use
User Settings
Engineer Settings
Heating Schedule
Energy Use
User Settings
Engineer Settings
2
Sensor Application
Adaptive Function
Open Window
Factory Reset
Temp. Scale
Room Sens. Calibr.
Floor Sens. Calibr.
Sensor Type
Sensor Application
Adaptive Function
Open Window
Factory Reset
Temp. Scale
Room Sens. Calibr.
Floor Sens. Calibr.
Sensor Type
Sensor Application
Adaptive Function
Open Window
Factory Reset
Temp. Scale
Room Sens. Calibr.
Floor Sens. Calibr.
Sensor Type
3
Sensor - 10 kΩ
Sensor - 12 kΩ
Factory
User Settings
Sensor - 10 kΩ
Sensor - 12 kΩ
Factory
User Settings
Sensor - 10 kΩ
Sensor - 12 kΩ
Factory
User Settings
4
Thermostat will use a
custom sensor type. Set
the 4 resistance values
for it ?
5
Custom Sensor
Value 1
2303
15°
6
8
7
7
Custom Sensor
Value 2
2303
20°
8
7
7
Custom Sensor
Value 3
2303
25°
8
7
7
Custom Sensor
Value 4
2303
30°
8
7
11
>
<
Contents
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG FRTD 903 TC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG FRTD 903 TC in the language / languages: German as an attachment in your email.

The manual is 21,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG FRTD 903 TC

AEG FRTD 903 TC Installation Guide - English, German - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info