Manual AEG FAVORIT 67032 VI0P (page 59 of 72) (English, German, Dutch, French)

527201

Zoom out

Zoom in

1/72

The pressure and the temperature of the water, the variations of the mains supply, the

options and the quantity of dishes can change the values.

Information for test institutes

For all the necessary information for test performance. send an email to:

info.test@dishwasher-production.com

Write down the product number (PNC) that is on the rating plate.

5. OPTIONS

Activate or deactivate the op-

tions before the start of a pro-

gramme. You cannot activate or

deactivate the options while a

programme operates.

If one or more options are set,

make sure that the related indi-

cators are on before the pro-

gramme starts.

5.1 ExtraHygiene

With this option you have better hygiene

results. During the rinsing phase, the

temperature stays at 70 °C for at least 10

minutes.

How to activate the ExtraHygiene

option

1. Press ExtraHygiene. The related in-

dicator comes on. In the display you

can see the update of the pro-

gramme duration.

• If the option is not applicable to

the programme, the related indica-

tor flashes quickly 3 times and then

goes off.

5.2 Multitab

Activate this option only when you use

the combi detergent tablets.

This option deactivates the use of rinse

aid and salt. The related indicators stay

off.

The programme duration can increase.

How to activate the Multitab option

1. Press Multitab, the related indicator

comes on.

If you stop to use the combi

detergent tablets, before you start to

use separately detergent, rinse aid

and dishwasher salt, do these steps:

1. Set the water softener to the highest

level.

2. Make sure that the salt container and

the rinse aid dispenser are full.

3. Start the shortest programme with a

rinsing phase, without detergent and

without dishes.

4. Adjust the water softener to the wa-

ter hardness in your area.

5. Adjust the released quantity of rinse

aid.

5.3 Acoustic signals

The acoustic signals operate when the

appliance has a malfunction, when the

adjustment of the level of the water soft-

ener occurs and when the programme is

completed.

By default, the acoustic signals are on,

but it is possible to deactivate them.

How to deactivate the acoustic signals

1. Press the on/off button to activate

the appliance. Make sure that the ap-

pliance is in setting mode, refer to

“Setting and starting a programme”.

2. Press and hold, at the same time but-

tons (4) and (5) until the indicators of

buttons (3), (4), (5) and (6) start to

flash.

3. Press button (5).

• The indicators of buttons (3), (4)

and (6) go off.

• The indicator of button (5) contin-

ues to flash.

• The display shows the current set-

ting.

Acoustic signal on.

ENGLISH 59

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG FAVORIT 67032 VI0P in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG FAVORIT 67032 VI0P Manual

Product: