45
To select a different level be sure that the dishwasher is off and
then proceed as follows:
1. Press INTENSIV 65° and NORMAL 50° programme push buttons simultaneously.
2. While keeping the programme push buttons INTENSIV 65° and NORMAL 50°
pressed switch on the dishwasher by pressing the On/Off push button.
The On/Off indicator light comes on.
At the same time, also the indicator light of the
INTENSIV 65° push button comes on and remains
fixed for about 5 seconds, after this it starts
flashing indicating the current level of the water
softener.
The current level is indicated by the number of
flashes made by the INTENSIV 65° indicator light, that alternates 5 seconds off
with a number of flashes, this for about 60 seconds.
Example:
1 flash = level 1
2 flashes = level 2
3 flashes = level 3
4 flashes = level 4
5 flashes = level 5
3. To change the level, press the INTENSIV 65° programme push button.
Each time the push button is pressed the level changes.
Examples:
if the current level is 3, by pressing the INTENSIV 65° programme push button
once, level 4 is selected
if the current level is 5, by pressing the INTENSIV 65° programme push button
once, level 1 is selected
The INTENSIV 65° indicator light remains off for about 5 seconds after which it
starts flashing indicating the new level selected.
4. To memorise the new level, switch off the dishwasher by pressing the On/Off
push button.
From level 2 upwards, if salt refilling is necessary, the salt indicator
light will illuminate only in setting mode and at the end of the
washing programme.
During the run of the programme it will remain off.
