SETTING THE TIME BEAM
COLOUR
Nine colours are available for this light
beam. You can change the colour or
deactivate it.
1. Press the on/off button to activate
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.
3. Press and hold touchpads (4) and
(5) at the same time until the indica-
tors of touchpads (3), (4), (5) and (6)
flash.
4. Press touchpad (6).
• The indicators of touchpads (3),
(4) and (5) go off.
• The indicator of touchpad (6)
continues to flash.
• The display shows a number and
the letter C. Each number is rela-
ted to a different colour (0C =
Time Beam deactivated).
5. Press touchpad (6) again and again
to change the colour.
6. Deactivate the appliance to confirm.
32