Gebrauchsanweisung
10
Anzeigelampen: haben folgende Bedeutung:
Die Salz und Klarspülerkontrolllampen leuchten niemals während des
laufenden Spülprogramms, auch wenn Salz bzw. Klarspüler fehlt.
Funktion- Taste 3 in 1: Dieser Geschirrspüler hat die Funktion 3 in
1, mit der die kombinierten Reinigungstabletten "3 in1" optimal
genutzt werden können.
Diese Funktion kann bei allen Spülprogrammen eingestellt werden.
Wenn diese Funktion aktiv ist, wird die Salz- und Klarspülerausgabe
aus den betreffenden Behältern unterbrochen und die Kontrolllampen
Salz und Klarspüler sind nicht aktiv.
Vor dem Einstellen des Spülprogramms die Funktion 3 in 1 einstellen.
Wenn die Funktion 3 in 1 aktiv ist, können die Spülzeiten abweichen.
Die am Multidisplay angezeigte verbliebene Zeit bis zum
Programmende wird automatisch aktualisiert.
Wenn diese Funktion eingestellt wird (entsprechende Kontrolllampe
leuchtet auf), bleibt sie bei allen darauf folgenden Spülprogrammen
aktiv. Zum Abschalten der Funktion die entsprechende Taste drücken
(Kontrolllampe geht aus).
HINWEIS: Nach dem Start des Spülprogramms kann die Funktion 3 in
1 NICHT mehr verändert werden. Wenn Sie diese Funktion abschalten
wollen, müssen Sie das Spülprogramm löschen (siehe "Löschen eines
laufenden Programms") und dann die Funktion mit der
entsprechenden Taste abschalten. In diesem Fall müssen Sie das
Spülprogramm erneut einstellen.
Salz: Spezialsalz nachfüllen
Klarspüler: Klarspüler nachfüllen
Laufzeit: Leuchtet auf, wenn das Spülprogramm eingestellt
wird.
Die Kontrolllampe “LAUFZEIT“ ist nicht aktiv, wenn die
“STARTZEIT” eingestellt ist.