697625
6
Zoom out
Zoom in
Previous page
1/36
Next page
6
www.aeg.com
ENGLISH
Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Jug
B. Removable mesh lter
C. Spout
D. Lid
E. Opening lid button
F. Handle
G. Water level indicator
H. Display
I. Temperature selector down ( )
J. Temperature selector up ( )
K. START/KEEP WARM button
L Separate base and mains cable
Picture page 2-3
GETTING STARTED
1 Before rst use, wipe the inside and outside of the kettle with a damp cloth.
2 Place the base unit on a rm and at surface. Plug the mains plug into a wall socket. Redundant cord can be wound into the
bottom of base unit.
3 Press the button to open the lid, pour water into the kettle. Make sure water level is visible in the water level indicator, but
not exceeding the Max. mark. Fill at least 0,6 L to ensure that the temperature shown on the display is reliable.
Recom-
mended temperatures:
40-60 °C for baby mixtures
80 °C for delicate teas (green/white)
90 °C for instant coee or soup
100 °C for perfect black tea
4 Close the lid and make sure it snaps in correctly. Place the kettle onto the base. The kettle beeps to indicate that it is ready
for use. The display shows the water temperature.
5 Press the START/KEEP WARM button.
When the water boils, the kettle beeps 3 times and switches o automatically
.
6 To heat water to selected temperature (not boiling): Press the buttons or to select temperature. Press the START/
KEEP WARM button. When the selected temperature is reached, the kettle beeps 3 times and switches o automatically.
7 To boil water and keep it warm at 90 °C: Press the START/KEEP WARM button twice. When the water boils, the kettle
beeps 3 times and keeps the water warm for 30 minutes.
8 To boil water and keep it warm at selected temperature: Press the buttons or to select temperature. Press the
START/KEEP WARM button twice. When the selected temperature is reached, the kettle beeps 3 times and keeps the water
warm for 30 minutes. The kettle heats the water to 100°C and then keeps the selected temperature.
9 The automatic switch o function. When the water has boiled or the kettle is moved from the base, it will switch o automati-
cally. If you wish to stop the heating process before the water is boiling, simply press the START/KEEP WARM button again.
The left LED light on the START/KEEP WARM button indicates boiling is in progress, the right LED light indicates KEEP
WARM function is active.
CLEANING AND CARE
10 Before cleaning, always unplug the appliance. Never rinse or immerse the kettle or base unit in water. Just wipe with a
damp cloth, using no abrasive detergents. Occasionally rinse out the kettle with clean water.
11 To clean the mesh lter, grab the strainer insert and lift out. Cleaning the heating plate – supercial spots of rust may ap-
pear on the base unit. Remove with a stainless steel cleaning agent.
12 Decalcifying is recommended regularly, depending on water hardness. Fill the kettle with water and decalcier according
to decalcier product instructions. Do not boil the solution as it may foam over. Afterwards, rinse kettle thorougly with fresh
water.
Enjoy your new AEG product!
EWA77xxx_WaterKettle_AEG.indd 6 2017-06-05 10:57:51
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG EWA7700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG EWA7700 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info