GB
2. Place the base unit on a rm and at
surface. Plug the mains plug into a
wall socket. Redundant cord can be
wound up at the bottom of base unit.
1. Before rst use, wipe the inside and
outside of the kettle with a damp
cloth.
3. Press the button to open the lid,
pour water into the kettle. Make sure
water level is visible in the water level
indicator, but not exceeding the Max.
mark.
Getting started
5. The automatic switch off function.
When the water has boiled or the
kettle is moved from the base, it will
switch o automatically. If you wish to
stop the heating process before the
water is boiling, simply lift up the ON/
OFF switch to the OFF position.
4. Close the lid and make sure it snaps
in correctly. Otherwise the auto
switch o function will not work
reliably. Place the kettle onto the
base. Press down the ON/OFF switch;
the indicator light will illuminate and
the kettle will start to heat up.