462821

AEG Electrolux X91384MDO Manual

9
Zoom out
Zoom in
Previous page
1/80
Next page
USE
A B C D E F
Button Function Specifications
A
Hood Functions On/Off When the button is touched with the hood turned off, all functions light up
(intensity 50%) and are enabled.
When the button is touched with the hood in operation, all functions are turned
off and disabled (Motor Off + Lights Off).
B
Manages motor speed:0--
V1--V2--V3--V4--P
When the area is touched, the motor starts at the speed required.
P = Intensive Speed, timed for 5 minutes, after which the system returns to the
previous speed. When activated from Motor Off it returns to speed V1.When
the required speed is touched, it will become brighter (intensity 100%) than the
other functions (intensity 50%).
C
Delay function Touching this button activates automatic shutdown of the Motor, the Fans and
the Lighting with a 10 minute delay. It can only be activated with the motor on,
running at any speed except Intensive, and with the Sensor = Off.
Enables / Disables the
Remote Control Receiver.
When this button is pressed and held for 4 seconds (Motor Off + Lights Off, in
the absence of other alarms, the Led will light up for:
4 seconds to indicate that the Remote Control has been Activated
2 seconds to indicate that the Remote Control has been Deactivated
D
Sensor In this mode the Hood operates automatically for a maximum of 5 hours, after
which it switches the Motor off. The hood modifies the speed of the motor
according to the findings of the sensor.
Buttons B and C do not work. The function is disabled by pressing the Button or
turning the hood off.
E
Manages Lighting
Intensity:0--L1--L2--L3-
-LMax
When this area is touched, the Lights turn on at the required intensity.
When the lighting intensity is touched, it will become brighter (intensity 100%)
than the other functions (intensity 50%).
F
Filter ResetResets the
Filter Saturation alarm
when the button is tou-
ched with the motor and
lighting turned off.
After 100 hours operation the Led lights up continuously to indicate saturation
of the Metal Grease Filters.After 200 hours operation the Led flashes to indicate
saturation of the Activated Charcoal Filters.
Enables/Disables the
Activated Charcoal Filter
Alarm.
When this button is pressed and held for 4 seconds(Motor Off + Lights Off), in
the absence of other alarms, the Led will light up for:
4 seconds to indicate that the Activated Charcoal Filter Alarm has been activated
2 seconds to indicate that the Activated Charcoal Filter Alarm has been deacti-
vated
After connecting the hood to the mains, the commands are activated after 4seconds. When the Hood is switched off, none of the fun-
ctions is displayed, and only the normal lettering on the control panel is visible. All the rest will light up (intensity 50%) when button A
is touched. The controls are activated by touching the selected function, which will light up more brightly (intensity 100%) with respect
to the other hood functions (intensity 50%). When no commands are given for at least 10 seconds, only the selected functions will be
lighted (Intensity 100%) and all the rest will turn off (Intensity 50%). After 7 hours in operation, if no further commands are given the
hood will switch off (Motor Off + Lights Off), from here you can touch for activated the function, and the next touch you can select the
desired function.It is possible to activate one of the hood functions (Speed and Lighting) not just by touching the control panel, but also
by placing a finger on the panel and sliding it towards the chosen function without lifting it off. If the motor and lights are turned off, by
setting them to zero, all the command LEDs will remain on at 50%, and if no further commands are given in the next 10 seconds, then all
the LEDs will be turned off with the exception of the “0” LEDs, which will remain on for a further 15 minutes.
GB - USE
9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Electrolux X91384MDO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Electrolux X91384MDO in the language / languages: English as an attachment in your email.

The manual is 4,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info