42
When ice coating is so thick that it can not be removed with the plastic
scraper, the frozen food compartment has to be defrosted (generally 2-3
times a year).
Take the foods out of the frozen and fresh food compartment, wrap them
into some layers of paper or cloth. Put them to a possible cool place while
defrosting.
Break the circuit of the appliance and leave the doors of frozen and fresh
food compartment open.
Continuously blot off the defrosting water by a soft cloth or sponge.
After defrosting wipe the surfaces, apply voltage to the appliance and put the
foods back to their places.
It is recommended to operate the appliance at the highest position of the
thermostatic control so that it can reach the proper storing temperature as
soon as possible.
Cleaning
Never use metal objects for cleaning your appliance as it may get damaged.
NEVER use detergents, abrasive powders, highly perfumed cleaning
products or wax polishes to clean the interior as these will damage the
surface and leave a strong odour.
Clean the inside with warm water and bicarbonate of soda. Rinse and dry
thoroughly.
To guarantee a safe operation of the fridge, once a year remove the
ventilation grill at the base and clean the air channels with a vacuum cleaner.
When the appliance is not in use
Disconnect the appliance from the electricity supply.
Empty all foods and clean the appliance, leaving the doors ajar to prevent
unpleasant smells.
How to change the bulb
Should the light fail to work you can change it as below:
Break the circuit of the appliance.
Unscrew the plate screw fixing the lamp cover, then take the lamp cover off
in the direction of arrow and the bulb can be changed. (Type of the bulb:
Mignon 322, 230 V, 15 W, E 14
thread)
After changing bulb replace the
lamp cover, screw the plate screw
and apply voltage to the appliance.
The lack of light does not influence
operation of the refrigerator.
