49
Switching off freezer section when fridge switched on:
1. Press and hold down the “+“and the “-“ buttons for the freezer section at
the same time. In the temperature display for the freezer section there is a
countdown from “3“ to “1“. Then “OF“ appears in the temperature display.
The freezer section switches itself off.
To switch the freezer section on again, press “+“ or “-“ button.
Switching off freezer section when fridge switched off:
1. Press and hold down the “+“and the “-“ buttons for the freezer section at
the same time. There is a countdown from “3“ to “1“, then “OF“ appears in
the temperature display. The freezer section or the whole appliance switches
itself off.
Note: The appliance cannot be switched on or off if unplugged, or if there
is no power being supplied to it. Following connection to the mains power
supply, the appliance returns to the same operating state as before the
interruption of main power.
If the appliance is not to be used for an extended period:
1. Switch appliance off by pressing and holding the ON/OFF button (see
above).
2. Remove the mains plug or switch off.
3. Defrost freezer compartment and clean thoroughly (see section: "Main-
tenance and Cleaning").
4. Leave the doors open after defrosting to avoid accumulation of odours.
Control and Information Systems
The control and information systems consist of a temperature display, an
optical warning indicator light and an acoustic warning.
The system warns:
– when there is a power cut;
– when the appliance doors are open
– when the temperature in the refrigerator or freezer compartment is too
high;
– if there are functional disturbances at the appliance.
Power cut warning
After an interruption to the power supply, POWER is displayed in the display
and the current Actual temperature is displayed again. The appliance con-
tinues to run with the previously selected settings. The POWER indicator
goes out, as soon as any button is pressed.
