347536
8
Zoom out
Zoom in
Previous page
1/20
Next page
8
Ga nu verder als volgt te werk:
1. Verwijder het onderscharnier (1)
en voetje (2-3).
2. Neem de onderdeur uit het tus-
senscharnier .
3. Verwijder het tussenscharnier,
trek de bovendeur van stift (G)
schroef hem af en breng hem aan
de andere kant weer aan.
Uw apparaat heeft lucht nodig
Om veiligheidsredenen moet de
ventilatie zodanig zijn als aange-
geven in de afbeelding.
Attentie: zorg ervoor dat de
ventilatie openingen tijdens
gebruik niet worden afgedekt.
A
B
NP005
100 mm10 mm
10 mm
Overzetten van het deurscharnier
Het deurscharnier kan van rechts (stand waarin het wordt afgeleverd) naar
links overgezet worden als dat voor de opstelplaats nodig is.
Waarschuwing! Bij het overzetten van de deurscharieren mag het apparaat
niet op het lichtnet aangesloten zijn. Van te voren de stekker uit het stop-
contact halen.
Muur-afstandshouders
In het documentenzakje bevinden
zich twee afstandshouders die vol-
gens de figuur geplaatst dienen te
worden.
Steek de afstandshouders in de gaten
en let erop dat de pijl (a) staat zoals
in de afbeelding; draai de afstand-
shouders dan 45° (pijl staat verticaal)
zodat ze vast komen te zitten.
D715 PIED/M
1
2
3
PR60
A
45°
33
Freezer
The freezer compartment, however, will become progrssively covered with
frost. This should be removed withal plastic scraper, whenever the tickness
of the frost exceeds 4 mm. During this operation it is not necessary to swit-
ch off the power supply or to remove the foodstuffs.
However when the ice becomes very thick on the inner liner, complete
defrosting should be carried out as follows:
1. pull out the plug from the wall socket or turn the thermostat knob to th “0”
setting.
2. remove any stored food, wrap it in several layers newspaper and put it in a
coll place.
3. leave the door open,
4. when defrosting is completed, dry the interior thoroughly
5. turn the thermostat knob to the required setting or raplace the plug in the
power socket.
Never use sharp metal tools to scrape off frost from the evaporator as you
could damage it.
Do not use a maechanical device or any artificial means to speed up the
thawing process other than those recommended by the manufacturer.
A temperature rise of the frozen food packs, during defrosting , may shor-
ten their safe storage life.
Switching off the appliance
To switch off the appliance, turn the temperature regulator to position "0".
If the appliance is not going to be used for an extended period:
1. Remove all refrigerated and deep-frozen packages as well as ice trays.
2. Switch off the appliance by turning the temperature regulator to position
"0".
3. Remove the mains plug or switch off or turn out the circuit breaker or fuse.
4. Defrost freezer compartment and clean thoroughly (see section: “Cleaning
and Care”).
5. Leave the door open to avoid the build up of odours.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeg-electrolux santo 60200 dt 178l at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeg-electrolux santo 60200 dt 178l in the language / languages: Dutch as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info