Manual Aeg-electrolux S71700TS (page 32 of 56) (English, Dutch, French)

464291

Zoom out

Zoom in

1/56

Detaching the worktop

To remove the worktop, please proceed as fol-

lows:

1. Unscrew left and right screws at the front.

2. Unscrew left and right screws at the back.

3. Lift the worktop slightly at the front, push

back about 20 mm and lift off from the

front.

4. Unscrew left and right screws at the back.

5. Store the screws in a safe place together

with the worktop.

Fitting and mounting to continuous worktop

Before fitting, change the door opening direc-

tion if necessary (see: Door reversibility).

Push the appliance carefully into the niche.

Take care that the mains cable is not jammed in.

Check distance from wall (see: Installing under a

continuous worktop).

Level the appliance by screwing the two adjusta-

ble feet at the front in or out, thus ensuring a

stable position.

With a suitable screws (depending on the design

of the worktop and the distance between the appliance and the worktop, not supplied),

fix the appliance under the worktop through the upper door hinge. If necessary, equalise

the gap between the door hinge and the worktop with a suitable washer (plastic or

wood, not supplied). This will prevent bending of the hinge and possible failure of door

function.

Door reversibility

To carry out the following operations, we suggest that this be made with another person

that will keep a firm hold on the doors of the appliance during the operations.

To change the opening direction of the door, do these steps:

1. Remove the plug from the power socket.

2. Tilt back the appliance carefully so that the compressor cannot touch the floor.

Installation

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aeg-electrolux S71700TS in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aeg-electrolux S71700TS Manual

Product: