Manual Aeg-electrolux precision at 6000 (page 10 of 64) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

378773

Zoom out

Zoom in

1/64

Operating Instructions

Prior to using for the first time

0 Plug the mains plug into the mains

socket.

0 To avoid the build up of unpleasant

odours, the appliance should be placed

near an open window and operated a

few times at the maximum browning

setting without any bread.

Toasting bread

0 Plug the mains plug into the mains

socket.

0 Using the browning control (Figure 1/C

and Figure 2) adjust steplessly the

browning setting from 1-6 as required.

Setting 1 for lightest browning. Setting

6 for darkest browning.

An automatic test is performed on first

turning the selector switch from the

"0" position. All indicator lamps light

briefly and an acoustic signal sounds.

Then the selector indicator lights cor-

responding to the set degree of brown-

ing.

Use a setting between 1 and 3 when

you first start toasting. If the toast is

not browned to your liking, set the

adjuster lower or higher, higher for

example when toasting rye or dark

bread. When toasting only 1 slice and

also when toasting bread that is no

longer fresh, use a slightly lower

browning setting.

We would recommend to adjust a set-

ting that the toast is browned to a „gol-

den yellow“ or „light-brown“ colour. The

electronic toasting time regulator

ensures that once a browning setting

has been chosen, the results are always

the same for the same type of bread.

0 Insert bread for toasting.

0 Press the bread lift button (Figure

1/D and Figure 2).

The toaster switches on and the bread

moves down.

During toasting, the browning degree

selector goes out in steps.

When the required degree of browning

has been reached, the toaster switches

off automatically and an acoustic sig-

nal sounds.

The slices of toast are lifted up ready

for removal.

0 After use, turn the browning degree

selector to position "0" and remove the

plug from the socket.

If you want to turn off the acoustic

signal permanently, use the slide

switch on the underside of the appli-

ance (Figure 1/N and Figure 7).

Stop button

(Figure 1/G and Figure 2)

If you want to interrupt toasting, press

the stop button. The appliance

switches off and the toast is lifted up.

Once chosen, the browning setting

remains unchanged.

Defrost button

(Figure 1/F and Figure 2)

Press the defrost button when toasting

frozen bread. This lengthens the toast-

ing time.

Warm up button

(Figure 1/E and Figure 2)

To warm up toasted bread press the

warm up button to keep the toast

warm and crisp.

Roll rack

Caution! The roll rack will become hot

during toasting, do not touch.

0 Fold up the roll rack: Press button (Fig-

ure 1/J) down (Figure 3).

0 Place rolls or other bread for crisping

on the rack, turn the browning control

to the required browning setting.

Caution! When the roll rack is used,

the maximum browning setting must

be no higher than setting 2 .

0 Switch on the toaster using the bread

lift button (Figure 1/D).

822_848_335 AT6000.book Seite 10 Freitag, 28. September 2007 10:16 22

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aeg-electrolux precision at 6000 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aeg-electrolux precision at 6000 Manual

Product: